Birla White cement in Muzaffarpur: 1, 5, 25 and 50 kg, what each job needs, and today's price
Birla White cement is white Portland cement for finishing, not for building the frame. Use it for marble and light stone, wide joints, a cement wash on new plaster, and art work such as jali, terrazzo and mosaic. We keep four packs: 1, 5, 25 and 50 kg. Today's price for each is on the putty and white cement rate board, with GST on the bill.
It is not putty, and it is not the best choice for ordinary tile joints. Where it differs.
Four jobs where white cement is the right material
Birla White describes it as premium white Portland cement, for wall finishes and premium finishes. A fine powder (370–400 Blaine) that gives a smooth finish even when mixed with pigment.
1. Tile joints
A paste of white cement fills a joint, but it is porous and it shrinks, so it takes up water and stains. Birla White says TileLynk, its polymer-modified grout, resists stains better than regular cement grout and does not shrink.
Use white cement for wide joints and for old-joint repairs. Use TileLynk for 1–6 mm joints in bathrooms, kitchens and balconies. Wait 24 hours after fixing before any joint filling (Birla White).
2. Marble and light stone
White and pale marble show what lies beneath. Grey cement can leave a grey shadow or a stain through the stone. Birla White recommends white cement adhesive mainly for light, see-through or marble tiles. For slabs, masons bed the stone on white cement and fine sand and fill the joints with white cement paste: usual practice.
For thin tiles use an adhesive, chosen by tile size: TileStix adhesive. For a marble slab floor, send us the slab size on WhatsApp.
3. White wash on plaster
A cement wash is a thin slurry brushed on plaster. Wet the wall first and keep it damp after. It is a cheap, bright finish for a boundary wall, store room or new plaster.
It is not paint: a wash chalks and rubs off. For bedrooms and halls, putty, primer, paint. Steps for a wash: white cement wash.
4. Art work
Jali, terrazzo, mosaic, name plates, statues and decorative pieces are made in white cement, because it takes colour: Birla White says it keeps a smooth finish when blended with pigments, and a tinted floor is a white-cement job.
Use the same water for every batch, or the colour changes. Ask us on WhatsApp for pigments; we can order them for you.
When not to use it: slab, columns, plinth and any load-bearing work. Birla White's own page mentions foundations, other sellers call white cement decorative only, so we take the safe side and give UltraTech grey cement for the structure. Compared: white against grey.
The packs we keep, and what each is for
Today's price for each pack, per kg too, is on the
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
putty and white cement rates. Birla White's page gives no price and no pack list, so this is the place for both.Pack for the job is usual practice, not a maker's figure; Birla White gives no coverage per kg for white cement. Delivery is charged separately; ask the amount for your site.
Not putty, and not grout
Putty. WallCare gets its whiteness from white cement, then adds polymers so a coat under 1.5 mm stays smooth and holds. You add water and nothing else. Plain white cement skimmed on a wall has none of that, and cracks. Putty is the layer under paint; white cement is not.
TileLynk. It is a ready grout for 1–6 mm joints. Birla White says it is stain-resistant, water-resistant and non-shrink, and made for glazed, vitrified, ceramic, granite and marble. Plain white cement is the cheaper filler for wide joints.
Tile adhesive. Adhesive fixes the tile; it is not a joint filler and not a wall finish. Which TileStix for which tile.
| White cement | WallCare putty | TileLynk grout | |
|---|---|---|---|
| What it is | Raw white binder; you add sand, water, pigment | Ready powder with polymers; add water only | Ready polymer-modified grout; add water only |
| Made for | Wash, marble, wide joints, art work | Dry inside walls, under paint | Joints between tiles |
| Layer | Whatever your mix allows | Two coats, under 1.5 mm together | Joints of 1–6 mm |
| Goes under paint? | No | Yes, then primer | No |
| Our packs | 1, 5, 25, 50 kg | 1, 5, 20, 40 kg | 1 kg pouch |
Five things that keep white cement white
Measure it. Different water gives a different shade, and a patch repaired next week will show.
A trace of grey cement turns white work dull and spotted. Wash everything, and do not mix on a floor that has grey dust.
A dry wall or slab drinks the water out of the mix. Wet it, with no water standing, then apply.
Spray lightly so it does not dry too fast. How long depends on the job: the wash guide gives the steps.
Damp turns powder to lumps and weakens it. Look at the date printed on the bag, and use the older bag first.
Short answers
What is the Birla White cement price in Muzaffarpur?
Our price for the day is on the putty and white cement rate board, for the 1, 5, 25 and 50 kg packs, with GST on the bill. Prices on other sites come from other cities and dates, so we do not quote one from memory. Delivery is charged separately; ask the amount for your site.
Which pack of white cement should I buy?
1 kg for touch-ups, 5 kg for a bathroom's joints or a small repair, 25 kg for the marble floor of one room or art work, 50 kg for a whole-house cement wash or a floor. The 50 kg bag is the cheapest per kg. The table above has all four.
Can I fill tile joints with white cement?
You can, but for joints of 1 to 6 mm we give TileLynk. Birla White says it resists stains better and does not shrink like regular cement grout. White cement suits wide joints and marble joints where the joint must match the stone.
Is white cement the same as putty?
No. Putty is a ready powder made for a thin layer under paint. White cement is a raw binder that you mix yourself. Do not skim a wall with plain white cement; use WallCare. The two side by side: putty or white cement.
Can I use white cement for the slab or foundation?
Use grey cement for the structure. Birla White's own page mentions foundations and other sellers call white cement decorative only, so we take the safe side: UltraTech grey for slab, column and plinth (our cement), white cement for finishes. White against grey.
Can I put pigment in white cement?
Yes. Birla White says it gives a smooth finish even when blended with pigments. Measure the water the same for every batch, or the colour shifts from one batch to the next. Ask us on WhatsApp for pigments; we can order them for you.
How long before I grout after fixing tiles?
Birla White says to let the fixed tiles cure for 24 hours before grouting. Which adhesive to use under which tile: TileStix adhesive.
Can I do cement wash on a bedroom wall?
It works on new plaster, but a wash is a thin coat that chalks and rubs off. For rooms that are lived in we advise putty, primer and paint: the order. How to mix and apply a wash: white cement wash.
Paint Engineer at our Reva Road store, Muzaffarpur. Figures here are Birla White's own, checked on 13 Nov 2026. Where makers and sellers disagree, the page says so and takes the safer side.
Where the numbers come from
- Birla White, White cement page: Hunter whiteness above 89%, fineness 370–400 Blaine, compressive strength 60 MPa (test age not stated), smooth finish with pigments, wall finishes and foundations. No price and no pack list on the page.
- Birla White, TileLynk tile grout: 1–6 mm joints; higher strength, water resistance and stain resistance than regular cement grout.
- Birla White, Is grouting really necessary: non-shrink formula, reduced staining.
- Birla White, Choosing the right cement-based tile adhesive: cure 24 hours before grouting.
- Birla White, What really holds tiles together, and white cement adhesive against grey: white cement adhesive mainly for light, translucent and marble tiles.
- Birla White, White cement flooring (16 Aug 2025): tinting, decorative pieces and statues, sealing and maintenance.
- HomeRun, white cement price list: a seller's view that white cement is decorative, not structural; shown only as the other side of the foundation question. Its prices are for Bangalore and are not ours.
- Store facts: our own shelf at Rewa Road (1, 5, 25 and 50 kg bills); WallCare and TileLynk packs as stocked.
Tell us the job
Marble floor, joints, wash or art work: we'll tell you the pack, the quantity to start with, and today's price, on WhatsApp.