हिंदी Call90310 74624
Home›Putty›TileStix tile adhesive
Tile adhesive · Birla White · in stock

Birla White TileStix Intero Grip+ (TX2) tile adhesive 20 kg in Muzaffarpur: which tiles it fixes, how much it covers, and today's price

The short answer

The TX2 bag on our shelf is for ceramic tiles up to 450 × 450 mm, indoors. That covers our Pivot 300 × 300 floor and 300 × 450 wall tiles. It is the wrong bag for our 600 × 600 vitrified (Vitribind), and for 600 × 1200, 200 × 1200 planks and the 400 × 400 outdoor tile (Extero). We order those two grades for you. The drawing on the right puts each of our tile sizes under its bag.

55–60
sq ft per 20 kg bagat a 3 mm bed, Birla White's figure. Less on a thicker bed.
4.8–5.2 L
Water per bag0.24–0.26 of the powder's weight. Nothing else added.
24 h
Before walking or groutingPot life is 2 hours, so mix a bag at a time.

Today's price is on the putty and white cement rate board, with GST on the bill. Not sure whether cement or adhesive? Tiles: cement or adhesive.

Our tiles, each under its adhesive
Our Pivot tile sizes, each placed under the TileStix grade it needsDrawn to one scale. Ceramic 300 by 300 and 300 by 450 tiles fit inside the 450 by 450 limit of Intero Grip+ (TX2). Vitrified 600 by 600 sits in the Vitribind limit. 600 by 1200, the 200 by 1200 plank and the 400 by 400 outdoor tile need Extero.Intero Grip+ (TX2)IN OUR SHOPceramic, indoors, up to 450 × 450 mmlimit 450 × 450300×300300×450Pivot 300×300 floorand 300×450 wall.Floor or wall, wetrooms too; walls to 3 mVitribindWE ORDER ITvitrified, up to 600 × 600 mm600×600limit 600 × 600Pivot 600×600 GVT.Vitrified tiles soak upalmost no water, so theadhesive must grip hard.ExteroWE ORDER ITup to 1200 × 1200 mm, inside or outside600×1200200×1200400×400Pivot 600×1200 and the200×1200 plank (insidethe dashed 1200 box),and 400×400 outdoor.
All tiles drawn to one scale. The dashed boxes are Birla White's largest size for that bag.
Which bag for which tile

The bag follows the tile, not the room

Birla White gives each TileStix grade a tile type and a largest size. A vitrified tile takes up almost no water, so a mild adhesive cannot grip it; a long or outdoor tile moves with heat and needs a flexible one. Match the tile first.

Our Pivot tileUse this TileStixWhy
300 × 300 floorIntero Grip+ (TX2)on our shelfCeramic, inside, within 450 × 450
300 × 450 wallIntero Grip+ (TX2)on our shelfCeramic, inside, within 450 × 450; walls up to 3 m
600 × 600vitrified, double chargeVitribindwe order itVitrified, up to 600 × 600 only
600 × 1200Exterowe order itPast Vitribind's 600 × 600 limit
200 × 1200 plankExterowe order itLong and thin: bends and lifts at the ends
400 × 400 outdoorExterowe order itOutside, in sun and rain

Vitribind and Extero come to order. Ask on WhatsApp how long it takes and tell us before the mason's start date. Ceramic or vitrified, and which suits which room: vitrified or ceramic.

The three bags side by side

Figures are from Birla White's brochures for Intero Grip+, Vitribind Grip+ and Extero Grip+, for a 20 kg bag.

Intero Grip+VitribindExtero
Tilesceramic, semi-vitreousalso vitrifiedalso large, long, outdoor
Largest tile450 × 450600 × 6001200 × 1200
Whereindoors, wet areas tooinside and outside floorsinside and outside, floor and wall
Standard (IS 15477 / EN 12004)1T / C1T2T / C2TE4TS1 / C2TES1
Open timeabout 20 min30 min or more40 min or more
Water per 20 kg4.8–5.2 L5.8–6.2 L6.0–6.4 L
Sq ft per bag, 3 mm55–6055–6060–70

All three: 2 hours pot life, 24 hours to set, bed 3–12 mm, work at 5–35 °C, 12 months on the shelf in a sealed pack. The "TS1" in Extero's name means it also flexes (deformability above 3.5 mm) and does not let tiles slip; TX2's sheet shows no flexing figure.

The bed under a tile
A tile bed in section: combed ridges, then pressed flatLeft: adhesive combed into ridges with a 6 by 6 millimetre notched trowel on cement plaster, with the tile about to be pressed on. Right: the tile pressed down, leaving a bed of about 3 millimetres.cement plaster or screed, dry and sound1. Comb6 × 6 mm notched troweltileridges stand 6 mm high2. Pressridges close to a flat bedtileabout 3 mm (sheet allows 3–12)
Not to scale. The 55–60 sq ft figure is for a 3 mm bed combed with a 6 × 6 mm notched trowel.
Coverage and bags

One bag does 55 to 60 sq ft, on a thin bed

Birla White's own test is a 20 kg bag spread 3 mm thick with a 6 × 6 mm notched trowel. It says coverage changes with the trowel notch, the tile and how even the base is. So the figure is a best case. On a floor that needs a 6 mm bed, a bag does about half: 27 to 30 sq ft. That halving is our arithmetic, not a line on the sheet.

For ceramic tile we add 10% for cut tiles and wastage, then divide by 55 (the lower figure). One 100 sq ft room is 2 bags on a good base, 4 on a rough one. Fixing a rough floor flat first costs less than the extra bags.

How many bags for my room

Allows 10% extra. Bags are worked out only for the bag we keep, TX2; for the other two grades we work it out with you.

You need

TileStix grade—
20 kg bags—
Water, in total—4.8–5.2 L for each full bag; mix one bag at a time
Boxes of tile—Whole boxes, with 10% extra. Boxes per room
WhatsApp us the room

For tiles, grout and putty for the wall above the tiles together, use the tiles calculator.

Fixing a tile with TX2
Fixing a tile with TX2, step by stepClean the base, mix 4.8 to 5.2 litres of water per bag, comb a patch you can tile in 20 minutes, press and adjust within 20 minutes, leave 24 hours, then grout.1Bare, dry, sound basecement plaster or screed; scrape off putty2Mix with water only4.8–5.2 L per 20 kg bag; use up within 2 hours3Comb a small patchonly what you can tile in about 20 minutes4Press and adjustabout 20 minutes to shift a tile; 5–35 °C site5Leave 24 hoursno walking, no grouting; heavy traffic after 24 h6Grout with TileLynkjoints 1–6 mm, then clean the face
Times are Birla White's: about 20 minutes to adjust, 2 hours pot life, 24 hours to set.
Fixing it

Water only, small patches, then leave it a day

Mix the bag with its 4.8 to 5.2 litres of water to a smooth paste. Nothing else goes in: no cement, no sand. Comb out only the patch you can tile in about 20 minutes; the adhesive skins over after that and the tile will not bond. A mixed bag is good for 2 hours, so a mason who mixes two bags at once wastes the second.

Press each tile down and slide it a little so the ridges close up, with no gaps underneath. Birla White gives about 20 minutes to nudge a tile into line. Keep the site between 5 and 35 °C.

After 24 hours the floor can be walked on and grouted. Joints of 1 to 6 mm take TileLynk grout, which comes in a 1 kg pouch. How wide to leave the joint: tile grout gap. Why adhesive and not a cement bed: cement or adhesive.

What goes under the tile

Cement plaster yes. Putty never.

Plaster or screed

TX2 fixes to a cement base, dry and sound. Birla White lists walls up to 3 m (9 ft) high, and tile over firmly bonded old tile. Tiles on old tiles.

Not putty

A tile on putty holds only as well as the putty holds the wall, and putty is weak. If the wall was puttied, scrape it to the plaster. Putty goes on the plain wall above the top row of tiles: WallCare.

Not a waterproofing coat

The adhesive is water resistant, so it is fine in a bathroom, but it does not stop a leak. Waterproof the floor and wall first: bathroom waterproofing.

On our shelf

The bag we keep, and what goes with it

Every product here can be ordered. Today's price is on the

Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.

putty and white cement rates.

Keep the bag dry and off the floor. Sealed, it lasts 12 months (Birla White). We sell genuine Birla White with a GST bill.

Questions people ask us

Short answers

Which tile adhesive for 600 × 1200 vitrified tiles?

TileStix Extero, not the Intero Grip+ (TX2) we keep on the shelf. Birla White limits TX2 to ceramic tiles up to 450 × 450 mm indoors. Vitribind stops at 600 × 600; Extero goes up to 1200 × 1200. We order Extero for you.

How much TileStix Intero Grip+ for 100 sq ft?

Birla White's coverage is 55–60 sq ft per 20 kg bag at a 3 mm bed. For 100 sq ft with 10% extra for waste that is 2 bags. On an uneven floor needing a 6 mm bed it is about 4 bags. This is a ceramic-tile figure; vitrified tiles need other grades.

How much water for a 20 kg bag of TX2?

4.8 to 5.2 litres, which is 0.24 to 0.26 of the powder's weight (Birla White data sheet). Some shops and websites say 5 to 6 litres; we take the maker's figure.

When can I walk on the floor or grout after fixing?

Birla White gives 24 hours for setting and for heavy traffic. Leave the floor alone for a full day, then fill the joints with TileLynk grout (1–6 mm joints).

Can I fix tiles over putty?

No. Putty is a smooth skim for paint and is weak under tile. Scrape it off to the plaster, then tile. Putty goes above the tiles, never under them.

Is TX2 waterproof, and can I use it outside?

Birla White calls it water resistant, so it is fine in wet areas indoors (bathroom, kitchen). It is not a waterproofing coat, and it is an indoor adhesive: balconies, parking and terraces need TileStix Extero.

Can I add cement or sand to the adhesive?

No. Add only water, as on the bag. Cement or sand changes the polymer mix the adhesive was made with.

Can I stick new tiles over old tiles?

Birla White lists tile-on-tile for Intero Grip+ when the old tiles are firmly bonded. See tiles over old tiles for how to check.

What is the TileStix 20 kg price in Muzaffarpur?

Today's price is on our putty and white cement rate board, for every TileStix bag, with GST on the bill. We do not quote a price from memory because it changes with the day and the carriage.

Mr Mustafaa
Paint Engineer, Tashya Ventures

Paint Engineer at our Rewa Road store, Muzaffarpur. The figures here come from Birla White's own brochures and data sheet, checked on 13 Nov 2026. Where a shop or website says something else, the page says so and takes the maker's figure.

Where the numbers come from

  1. Birla White, TileStix Intero Grip+ brochure: ceramic and semi-vitreous tiles, indoors, walls to 3 m, 55–60 sq ft at 3 mm with a 6 × 6 mm trowel, pot life 2 h, 12 months, IS 15477 Type 1T, EN 12004 C1T.
  2. Birla White, Intero Grip+ technical data sheet: mixing ratio 0.24–0.26 by weight, open time and adjustability about 20 min, setting and heavy traffic 24 h, bed 3–12 mm, 5–35 °C.
  3. Birla White, Vitribind Grip+ brochure and Extero Grip+ brochure: grades, open times, water ratios, coverage and standards in the comparison table.
  4. Birla White, Intero Grip+ product page and What really holds tiles together: tile-on-tile, water resistant, about 24 hours before grouting or foot traffic.
  5. Compared and set aside where they differ: Home-Run's TX2 listing (water 5–6 L; the maker says 4.8–5.2) and StudioMatrx's tile adhesives guide (general grades, no figures for our tiles).
  6. Store facts: the TX2 bag on our shelf; Vitribind and Extero by order; Pivot box contents from the Birla Pivot catalogue.

Send us your tile and room size

We'll tell you which TileStix bag, how many, and today's price, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com