हिंदी Call90310 74624
Home›Calculators›Tiles
Calculator · tiles

Tiles calculator: boxes, adhesive, grout and putty with a ₹ total

Put in your room and pick a tile from our shelf. You get the tiles, whole boxes, the right TileStix adhesive, TileLynk grout and, for walls, the putty for the plain wall above the tiles. One list, one total, sent to us on WhatsApp.

1Where
2Size
Door 3 × 7 ft and window 2 × 2 ft are taken off the tiles. Bathroom: tiles usually to 7 ft. Kitchen: tile the wall strip as its own job.
3Tile from our shelf
—

Filled from the Birla Pivot catalogue. Change it if your box label says otherwise.

4Joint and wastage
Grout gap
Wastage
To tile: — sq ft

Your list

Tiles———
TileStix adhesive———
TileLynk grout, 2 mm joint———
WallCare putty, wall above the tiles—17–20 sq ft per kg for 2 coats (Birla White). Never under the tiles.—
Material totalAsk rate
Send this list on WhatsApp

Prices fill in from today's tile rate. Adhesive and grout are worked out for the area actually laid; buy for the high number on a rough floor. Floor and walls of one room: work them out one after the other and send both.

4 / box
600 × 600 mm15.5 sq ft a box. 600 × 1200: 2 a box, same 15.5 sq ft. Birla Pivot catalogue.
≤ 450 mm
Our TileStix TX2Ceramic tiles up to 450 × 450 mm, inside. Vitrified tiles take Vitribind or Extero.
1–6 mm
TileLynk jointsWider than 6 mm, TileLynk is not the grout for it. 1 kg packs.
How the numbers are worked out

Area alone undercounts. Cut pieces are where tiles go.

Every tile cut at a wall uses a whole tile from the box. That is what the wastage percentage pays for, and why a room that does not suit the tile size wastes more than 10%.

A 12 × 10 ft room in 600 × 600 tiles
Floor plan of a 12 by 10 foot room laid with 600 by 600 millimetre tiles Six full tiles fit along 12 feet and five along 10 feet, leaving a thin strip on two sides. Thirty full tiles, plus thin cut pieces along two walls and a corner. 12 ft 10 ft 130 30 full tiles thin cut strips By area: 120 ÷ 3.875 = 31 tiles. With 10%: 35 tiles. Laid from one corner: 30 full + 11 strips (two strips from one tile) + 1 corner = 37 tiles = 10 boxes.
The strips are drawn wider than they are (about 2.5 cm) so you can see them. The calculator does this check for floors and warns you when your wastage is too small.
  1. Area to tileFloor: length × width. Walls: the room's perimeter × the tile height, less doors (3 × 7 ft) and windows (2 × 2 ft).
  2. Tiles and boxesArea plus wastage, divided by one tile (600 × 600 mm is 3.875 sq ft), rounded up. Then divided by tiles per box from Birla Pivot's catalogue, rounded up to whole boxes.
  3. Layout check, floorsThe calculator also lays the tiles in a grid from one corner and counts the cut pieces. If that count is higher than your wastage gives, it tells you.
  4. AdhesiveBed thickness × area × 1.3–1.45 kg per sq m per mm. We worked that rate out from the TileStix Intero Grip+ data sheet (water 0.24–0.26 by weight, wet mix 1.6–1.8 kg per litre). 20 kg bags, rounded up.
  5. GroutBirla White's own TileLynk method: joint width × tile thickness × joint length per sq m × 1.75 kg per litre. Plus 10% for mixing, in 1 kg packs.
  6. Putty, walls onlyOnly the plain wall between the top tile and the ceiling. WallCare covers 17–20 sq ft per kg for two coats (Birla White).
What sits under and between the tiles
Cross-section of a tiled floor From the bottom: floor slab or screed, a TileStix adhesive bed 3 to 12 millimetres thick combed into ridges and pressed flat under the tiles, the tiles 7.5 to 11.8 millimetres thick, and a joint between two tiles filled with TileLynk grout to the full depth of the tile. Tile7.5–11.8 mm thick (Pivot) TileLynk grout in the joint1–6 mm wide, full tile depth TileStix adhesive bed 3–12 mm (Birla White) Slab, screed or cement plaster firm, clean, level: no putty combed with anotched trowel
Not to scale. Grout fills the joint for the whole thickness of the tile, so thicker tiles and wider joints take more. Adhesive and grout both need 24 hours before you walk on them (TileStix and TileLynk data sheets).
Which TileStix for which tile

The bag we keep is not for vitrified tiles

This is where most tile jobs go wrong. Birla White sets a tile type and a largest size for each TileStix grade. The calculator picks the grade from the tile you choose.

Our tiles drawn to scale, grouped by the TileStix grade each needs Ceramic 300 by 300 and 300 by 450 tiles: TileStix Intero Grip+, which we stock. Vitrified 600 by 600: TileStix Vitribind. 600 by 1200, 200 by 1200 plank and 400 by 400 outdoor: TileStix Extero. Intero Grip+ (TX2) IN OUR SHOP ceramic, inside, up to 450 × 450 mm 300×300 300×450 limit 450 Floor and wall, wetareas too; walls upto 3 m high Vitribind WE ORDER IT vitrified, up to 600 × 600 mm 600×600: GVT, doublecharge, soluble salt Vitrified tilessoak up almostno water Extero WE ORDER IT up to 1200 × 1200 mm, inside or outside 600×1200 200×1200 plank 400×400outdoor Vitribind stops at 600 × 600, so 2 × 4 ft tiles and planks move up to Extero. Outside, spacers are compulsory.
Tiles drawn to one scale. Limits from Birla White's TileStix product pages.
Our tileTileStix grade
300 × 450 wall, 300 × 300 floorceramicIntero Grip+ TX2, on our shelfCeramic and semi-vitrified up to 450 × 450 mm, inside; 4.8–5.2 L water per 20 kg
600 × 600 GVT, double charge, soluble saltvitrifiedVitribind, we order itBirla White: vitrified tiles need "Vitribind or above"; up to 600 × 600 mm
600 × 1200 GVT, 200 × 1200 plankvitrified, longExtero, we order itUp to 1200 × 1200 mm; Vitribind and Vitribind Grip+ both stop at 600 × 600
400 × 400 outdoorparking, porch, terraceExtero, we order itBirla White's grade for outside, where sun and rain move the tiles

We keep TX2 in the shop. Vitribind and Extero come to order: ask on WhatsApp how long it takes, and tell us before the mason's start date. The whole family is explained in which TileStix for which job, and why not plain cement in tiles: cement or adhesive.

Bathroom and kitchen walls

Tiles go on plaster. Putty goes above them.

Wall tiles are fixed with adhesive on the rough cement plaster. Putty is a smooth skim for paint. A tile stuck on putty holds only as well as the putty holds the wall. So the calculator gives putty only for the plain wall above the top row of tiles.

A 8 × 6 ft bathroom, four walls opened out
Bathroom walls unfolded: tiles to 7 feet, putty above Four walls of 8, 6, 8 and 6 feet side by side, 10 feet high. Tiles cover the bottom 7 feet with a door cut out of one wall. The top 3 feet are puttied and painted. door 3 × 7 ft 8 ft6 ft8 ft6 ft WallCare putty, primer, paint 28 ft × 3 ft = 84 sq ft → 5 kg putty Tiles on bare plaster, TileStix 28 × 7 − door 21 = 175 sq ft 3 ft tiles 7 ft no putty below this line
The wall numbers are the calculator's own walls example (8 × 6 ft room, tiles to 7 ft, 10 ft ceiling, one door). The floor of the same bathroom is a separate floor job; give it 15% wastage.

Before the bathroom wall is tiled: waterproofing at the floor and the wet corners, and the geyser and tap points fixed. See points to fix before tiles. Putty, primer and paint for the rest of the room: paint calculator.

What is in a box

Box contents and grout for the tiles we stock

Box figures are from Birla Pivot's tiles catalogue. Grout is from Birla White's TileLynk table for each size, per 100 sq ft laid.

TileTiles a boxSq ft a boxThicknessTileLynk, 2 mm / 3 mm joint
600 × 600 GVT, double charge415.58 mm0.9 / 1.3 kg
600 × 1200 GVT215.58.2 mm0.7 / 1.0 kg
300 × 450 wall68.727.5 mm1.4 / 2.0 kg
300 × 300 floor87.757.5 mm1.6 / 2.4 kg
400 × 400 outdoor58.6111.8 mm1.9 / 2.9 kg
200 × 1200 planknot in Pivot's packing tableread the box——about 1.5 / 2.3 kgat 8 mm thick, assumed

Pivot's catalogue gives the box only by size and kind. Our 600 × 600 soluble-salt tile (Ivory) is not listed separately; we take it as 4 a box like the others, and you can change it in the calculator. Buy all boxes of one design from the same batch, and keep one spare box: why the shade changes between batches.

Questions people ask us

Short answers

How many tiles and boxes for a 10 × 12 ft room?

The floor is 120 sq ft. A 600 × 600 mm tile is about 3.875 sq ft, so 31 tiles by area, or 35 with 10% wastage. Birla Pivot packs 4 of these in a box, so 9 boxes (36 tiles, 139.5 sq ft). The layout check above shows this room can need 37 tiles if laid square from one corner, so pick 15% or ask us to look at your plan.

How many tiles are in a box? (1 box mein kitni tiles)

From Birla Pivot's catalogue: 600 × 600 mm, 4 tiles, 15.5 sq ft. 600 × 1200 mm, 2 tiles, 15.5 sq ft. 300 × 450 mm wall tiles, 6 tiles, 8.72 sq ft. 300 × 300 mm floor tiles, 8 tiles, 7.75 sq ft. 400 × 400 mm outdoor, 5 tiles, 8.61 sq ft. The wooden plank is not in Pivot's table, so read its box label.

How many bags of tile adhesive for 100 sq ft?

Wall tiles on a 3 mm bed: about 35–40 kg, so 2 bags of 20 kg. 600 × 600 floor tiles on a 6 mm bed: about 71–81 kg, so 4 to 5 bags. We worked out the rate (1.3–1.45 kg per sq m for each mm) from the TileStix data sheet. An uneven floor takes more; level it first.

Can I use your TileStix TX2 for vitrified tiles?

No. Birla White says Intero Grip+ is for ceramic and semi-vitrified tiles up to 450 × 450 mm, inside, and that vitrified tiles need Vitribind or above. Vitribind goes up to 600 × 600 mm. For 600 × 1200 mm, the 200 × 1200 planks and tiles outside, use Extero. We order Vitribind and Extero for you.

How much grout do I need?

Birla White's TileLynk table gives 0.09 kg per sq m for 600 × 600 tiles with a 2 mm joint, so about 1 kg for 100 sq ft. Smaller tiles have more joints: 300 × 450 wall tiles take about 1.4 kg per 100 sq ft. TileLynk fills joints 1 to 6 mm wide and comes in 1 kg packs.

Should putty go under wall tiles?

No. Tiles are fixed with adhesive on cement plaster; Birla White lists cement-based screeds and mortars as the surface for TileStix. Putty is for the plain wall above the tiles, which gets primer and paint. The calculator gives putty only for that part.

How much wastage should I add?

5% for a big, plain room in a straight layout. 10% for most rooms. 15% for bathrooms, diagonal laying and 600 × 1200 tiles, where cuts are big and breakage costs more. The calculator's layout check tells you when the room size itself needs more.

Why does it ask me for tiles per box for the wooden plank?

Birla Pivot's catalogue table does not list the 200 × 1200 plank. Rather than guess, the calculator gives the tile count and asks you to type the number printed on the box, or send us the list and we read it off the box in the shop.

Where the numbers come from

  1. Birla Pivot, Tiles: Surface Symphony Collection catalogue (Grasim Industries, Dec 2024), packaging tables on pp. 61–64: tiles per box, sq m and sq ft per box, thickness and weight for GVT, double charge, ceramic wall and floor, and parking tiles.
  2. Birla White, TileStix Intero Grip+ page (FAQ) and technical data sheet: ceramic and semi-vitrified up to 450 × 450 mm, inside; vitrified needs Vitribind or above; 4.8–5.2 L water per 20 kg; mixing ratio 0.24–0.26; wet density 1.60–1.80 kg/L; bed 3–12 mm; 24 h setting.
  3. Birla White, TileStix Vitribind and Vitribind Grip+ pages (FAQ): vitrified, ceramic and porcelain tiles up to 600 × 600 mm.
  4. Birla White, TileStix Extero page (FAQ): tiles up to 1200 × 1200 mm, inside and outside; spacing between tiles compulsory outside.
  5. Birla White, TileLynk tile grout page (FAQ) and technical data sheet: consumption table in kg/m² by tile size and joint width (mix density 1.75 kg/L), joints 1–6 mm, 1 kg pack, foot traffic after 24 h, heavy traffic after 7 days.
  6. Birla White, Wall putty work: step-by-step process: 17–20 sq ft per kg for two coats.

Usual practice, not from a maker's sheet: wastage 5/10/15%, door 3 × 7 ft, window 2 × 2 ft, bed thickness suggested by tile size (3 mm small ceramic, 6 mm 600 × 600 and outdoor, 8 mm for 1200 mm long tiles laid with adhesive on the tile back as well).

Send us your room

Room size, floor or walls, and the tile you like. We send back the boxes, adhesive, grout and putty with today's price, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com