Round up, then use the fewest packs
Take the bigger kg figure, round up to the next 5 kg, and make it from 40, 20 and 5 kg packs. If that needs three or more 5 kg packs, one more 20 kg is simpler. The calculator does this for you.
1 kg of WallCare putty covers 17–20 sq ft of wall, both coats together, on normal plaster. On rough or wavy plaster it covers only 10–15. Measure the wall area, divide, and round up to whole packs.
Putty goes on walls, and on the ceiling if you putty it. A "12 × 10 room" is 120 sq ft of floor but more than 400 sq ft of wall. Open the walls out flat and add them up.
12 + 10 + 12 + 10 = 44 ft.44 × 10 = 440 sq ft.21 sq ft, a 4 × 4 ft window 16 sq ft. Here: 440 − 37 = 403 sq ft.12 × 10 = 120 sq ft. Most new houses here do putty the ceiling.403 ÷ 20 = 20 kg, 403 ÷ 17 = 24 kg. Buy for the bigger number.Leave out walls that will be tiled: bathroom walls up to the tile height, the kitchen wall behind the platform. Putty there is wasted.
Odd shapes: a sloping gable wall is base × height ÷ 2; a stair wall is easiest split into a rectangle and a triangle. Birla White's estimating guide gives these shapes too.
You will find putty coverage quoted anywhere from 10 to 22 sq ft per kg, sometimes on the same maker's website. Nobody is lying. They are measuring different walls.
An even plaster needs only a skin of putty. A rough, sponge-finished or wavy plaster has pits that swallow putty before the face is smooth. Same kilo, about half the area. Birla White's figure is for a "smooth normal mortar wall". Asian Paints' lower figure is for "rough masonry".
Both coats together should not go over 1.5 mm, says Birla White. A painter who lays it thick to hide waves uses more per sq ft, and a thick coat is the one that cracks. Waves belong in the plaster, or under Levelplast, before putty.
Every figure on this page is for both coats together. Birla White's brochure says "in two coats", and so does the Asian Paints sheet. If anyone quotes you a per-coat figure, halve it before comparing. Why two coats: putty kitne coat.
| Who says it | sq ft per kg |
|---|---|
| Birla White, WallCare brochure"1.5 to 2.0 square meters in two coats" on a smooth normal mortar wall | 16–21.5 |
| Birla White, putty-work guide"depending on the substrate" | 17–20 |
| Birla White, estimating guide1.86–2.04 sq m per kg; coats not stated | 20–22 |
| Birla White, pack-size guide600–800 sq ft per 40 kg, labelled "single coat" | 15–20 |
| Asian Paints, TruCare Wall Putty sheet2 coats, up to 1.5 mm, rough masonry, putty knife | 10–15 |
| What we plan withNormal plaster. Buy for 17. | 17–20 |
| …and on rough plasterBuy for 10. | 10–15 |
The odd one out is Birla White's pack-size guide calling 15–20 a single-coat figure. That would mean only 7–10 sq ft per kg for two coats, below every maker's sheet. We go by the brochure, the product's own document, and plan at the safe end of it. The 17–20 is also the figure our paint calculator uses.
The 10 × 12 ft room from above: 10 ft walls, one 3 × 7 ft door, one 4 × 4 ft window.
| Step | Result |
|---|---|
| Walls2 × (12 + 10) × 10 | 440 sq ft |
| Door and window off21 + 16 | − 37 |
| Wall to putty | 403 sq ft |
| Normal plaster403 ÷ 20 and 403 ÷ 17 | 20–24 kg |
| Rough plaster403 ÷ 15 and 403 ÷ 10 | 27–40 kg |
| Ceiling too+ 120 sq ft = 523 sq ft | 26–31 kg |
| Buy, walls only, normal plaster24 kg needed: one 20 kg bag and one 5 kg pack | 20 + 5 kg |
Why not one 40 kg bag for one room? You would carry 15 kg back home. Take the 40 kg only when you also putty the ceiling, or the next room soon, or if today's rate makes the 40 kg bag cheaper than 20 + 5. Compare on the putty rate page.
Birla Opus's rule of thumb is that the inside walls and ceilings of a house come to about 3.5 × the floor (carpet) area. So 1,000 sq ft of floor is about 3,500 sq ft to putty. It is a rough guide: measuring room by room, in the calculator below, is closer.
Measure a room, type a wall area you already know, or give the floor area of the house. You get kg and the packs to buy. For primer and paint as well, use the paint calculator.
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
WallCare putty, 2 coats—17–20 sq ft per kg (Birla White)Packs: WallCare 1, 5, 20 and 40 kg. Prices are filled in from today's rate. Primer and paint for the same walls: paint calculator.
Take the bigger kg figure, round up to the next 5 kg, and make it from 40, 20 and 5 kg packs. If that needs three or more 5 kg packs, one more 20 kg is simpler. The calculator does this for you.
A job that stops halfway for one more bag loses half a day and leaves a dried edge to sand. Leftover putty keeps: Birla White says to use it within 12 months of the date of manufacture, stored dry. Keep the bag closed and off the floor.
Mixed putty has to be used within 2–3 hours (Birla White), so mix only what the painter will spread in that time. Water and method: putty mixing.
For walls that meet damp, use Waterproof putty (40 kg on our shelf; 1, 5, 20 and 30 kg we order for you) after the leak is fixed. Plan it a little lower, about 16 sq ft per kg.
At 17 sq ft per kg, 100 sq ft takes about 5.9 kg. So material for 100 sq ft is 5.9 × Ask rate per kg = Ask rate. Take the per-kg price of the pack you will actually buy; the 40 kg bag is usually cheapest per kg. Today's prices: putty and white cement rates.
Labour is separate and set by the painter. What it usually covers and the going rate: putty karne ka rate. Everything else the job needs (blade, emery, primer): putty ka pura samaan.
"1,000 sq ft house, so 50 kg." Putty covers walls and ceilings, which come to about 3.5 times the floor.
Planning at 20 sq ft per kg on sponge-finished plaster is how a job runs out on the last wall.
One makes you short by a bag; the other makes you carry one home.
Every product here can be ordered, including pack sizes we don't keep on the shelf. The full order of layers on a wall: putty, primer, paint.
For Birla White WallCare, about 17–20 sq ft for both coats together on normal plaster. Its brochure gives 1.5 to 2.0 sq m per kg in two coats on a smooth, normal mortar wall. On rough or wavy plaster plan on 10–15 sq ft, the figure Asian Paints gives for rough masonry.
About 5–6 kg for two coats on normal plaster (100 ÷ 20 to 100 ÷ 17), and 7–10 kg on a rough wall. The 100 sq ft is wall area, not floor area.
Do coat mein 17 se 20 sq ft, aam plaster par. Khurdure ya lehardaar plaster par 10 se 15 sq ft maankar chaliye.
With 10 ft walls, one door and one window, about 403 sq ft of wall: 20–24 kg, so one 20 kg bag and one 5 kg pack. With the ceiling too, 26–31 kg: one 40 kg bag.
Inside walls and ceilings come to about 3.5 × the floor area (Birla Opus's rule of thumb), so about 3,500 sq ft. At 17–20 sq ft per kg that is 175–206 kg: five 40 kg bags and two 5 kg packs. On rough plaster it can reach 350 kg. Measure room by room in the calculator for a closer figure.
Two. Birla White's WallCare brochure and the Asian Paints TruCare sheet both state their figure for two coats. One Birla White page labels 15–20 sq ft as one coat; that disagrees with its own brochure, which we follow.
Material per sq ft is the price of 1 kg divided by the sq ft one kg covers. At 17 sq ft per kg, 100 sq ft takes about 5.9 kg; multiply by today's per-kg price from the putty rate page. Labour is separate: putty karne ka rate.
If the ceiling gets emulsion paint, yes: it hides the shuttering marks the same way it smooths a wall. Count it in the area: length × width of the room.
Paint Engineer at our Reva Road store, Muzaffarpur. Every coverage figure on this page was checked against the maker's own document on 12 Nov 2026. Where the makers disagree, the page shows each figure and plans at the safe end.
We'll work out the bags of putty for your walls and send them back with today's price on WhatsApp.