हिंदी Call90310 74624
Home›Putty›Birla White Waterproof putty
Putty · Birla White · 40 kg in stock

Birla White Waterproof putty (WallSeal) in Muzaffarpur: where to use it, what a bag covers, and why it will not fix a leak

The short answer

Waterproof putty is for walls where water hits the face. An outside wall in the rain, the room side of a bathroom wall, a sink wall, a ground floor that sweats in the monsoon. We keep the 40 kg bag. One bag does about 640 to 760 sq ft in two coats.

It does not stop a leak. If water is coming from behind the wall, stop that first, let the wall dry, then putty.

2×
Water resistanceOf a normal cement putty, as Birla White rates it.
16–19
Sq ft per kgTwo coats. Use 16 on a rough wall.
≈ 15 L
Water in a 40 kg bag36–38% of the weight: 14.4 to 15.2 litres.

For dry inside walls the cheaper putty is enough: WallCare. The two side by side: WallCare or Waterproof putty.

Where the water comes from decides it
What waterproof putty holds off and what it does notCross-section of a wall: brick, plaster, two coats of waterproof putty and paint. Rain and steam on the face bead off. Water arriving from behind the wall still pushes through and lifts the putty and paint. BEHIND THE WALL leak, rising damp ON THE FACE rain, steam, splash beads off blisters, putty lifts Brick Plaster WallSeal, 2 coats (1.5 mm) Paint
Not to scale. Water landing on the face (right) beads off. Water arriving from behind (left) gathers behind the putty and blisters it. "2×" and "not for active leaks": Birla White's WallSeal page and its waterproof-vs-regular putty post.
Birla White's own figures

WallSeal: what the maker says, and what it means on site

Every figure has the maker named. Where Birla White's pages disagree, the page says so and takes the safer figure.

WhatBirla White saysOn site
Spread, 2 coats1.49–1.77 sq m per kg (16–19 sq ft)40 kg = 640–760 sq ft. Use 640 on rough or old plaster.
Water36–38% of the weight (360–380 ml per kg)About 15 litres a bag. Powder into the water, not the other way round.
Life of mixed paste3–3.5 hoursMix what can be spread. A full bag mixed at once wastes its last part.
Coats2; the first on a pre-wetted wallWetting is a must, with no water standing or dripping.
Between coatsAt least 3–4 hoursToo soon and the first coat drags.
ThicknessBoth coats together 1.5 mm at mostThicker is not more waterproof, it cracks. Dips are filled in the plaster first.
Before paintBrochure: let it dry 24 hoursThen one coat of primer, then paint: the full order.
SandingOnly very fine waterproof paper, No. 500 or finerRough paper breaks the water-repelling film. Smooth it as you apply.
WhereProduct page: exterior walls. Brochure: inside walls that meet moisture too.We supply it for both; see below which wall.
Life of the bagBrochure: 12 months from making. One seller's listing: 6 months.Take the safer one: check the making date on the bag and use within 6 months.
Which wall

The water decides the putty

Pick the card that is your wall. The full wall-by-wall list is on the comparison page; this is only the decision.

Use WallSeal

Water hits the face

  • An outside wall that takes rain (outside paint: outside wall waterproofing)
  • The room side of a bathroom wall, a sink wall
  • A ground-floor wall that goes damp every monsoon
WallCare is enough

The wall stays dry

  • Bedrooms, hall, stairs, walls under a sound roof
  • No sign of water, ever
  • Waterproof here is money wasted: WallCare

Waiting for it to dry. After the leak is fixed, let the wall dry fully. Test by touch and colour; usually a few weeks after the leak is fixed. Go by the wall, not the calendar.

How many bags

Waterproof putty for your room

Put in the room size (or only the wall that gets wet). It uses Birla White's 16–19 sq ft per kg, so you get a low and a high number. On rough plaster buy for the high one. Whole house:

Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.

how many bags of putty.

Wall to putty: — sq ft (door 3×7 ft, window 4×4 ft taken off)

Your list

Waterproof putty, 2 coats—16–19 sq ft per kg (Birla White)
Water to mix—36–38% of the weight
Packs for the high number—40 kg is on our shelf; we order 1, 5, 20 and 30 kg for you.Ask today's rate
Send this list on WhatsApp

Prices are filled in from today's rate. GST bill on every sale.

Packs and price

40 kg on the shelf; the other packs we order

PackWater (36–38%)Covers, 2 coats
1 kg0.36–0.38 L16–19 sq ft
5 kg1.8–1.9 L80–95 sq ft
20 kg7.2–7.6 L320–380 sq ft
30 kg10.8–11.4 L480–570 sq ft
40 kg · on our shelf14.4–15.2 L640–760 sq ft

Today's price for each pack: putty and white cement rates. Primer to go with it: ActivCoat Interior. Transport is charged separately: delivery.

Looking for Asian Paints or Berger waterproof putty? We sell genuine Birla White with a GST bill, and this page is everything about it. A bag of another make has its own sheet; check the same three things in it, the ones in the table above: coverage per kg, water per kg, and what the maker says about leaks.
On the wall

The putty part, from a dry wall to paint

WallSeal, step by step
Putting WallSeal on a wall, step by stepSeven steps from a dry, sound wall to paint: wet the wall, mix, first coat, wait 3 to 4 hours, second coat, dry 24 hours, primer.1Wall dry and soundleak fixed, plaster repaired2Wet the walla splash; no water standing3Mix the paste1 kg putty : 360–380 ml water, 3–5 min4Coat 1use the paste within 3–3.5 h5Wait 3–4 hoursthen coat 26Coat 2both coats together 1.5 mm at most7Dry 24 hoursthen primer, then paint
Red circles are putty work, blue are preparation, black are waiting. Times are Birla White's; allow longer on a humid day.

Steps 1 and 2 are where it usually goes wrong. Putty on a wall that is still leaking holds a few weeks and lets go. And "wet the wall" is not the same as "a damp wall": Birla White asks for a splash so the plaster does not drink the water out of the paste. A seelan wall is soaked from inside, which is not a splash. The difference is in this guide.

Mix with a machine stirrer for 3 to 5 minutes, not by hand. Then spread thin with a putty blade: both coats together 1.5 mm. Thickness, why two coats and the other rules are the same as for WallCare; the differences here are the second coat after 3 to 4 hours and sanding only with very fine paper.

The paint maker puts a primer over putty, so we do too: one coat. The order for a whole house, the days it takes, and the inside and outside primers are in putty, primer, paint. How many coats and why: putty kitne coat.

Questions people ask us

Short answers

Is Birla White waterproof putty really waterproof?

It holds off water at the face of the wall. Birla White rates WallSeal at 2 times the water resistance of a normal cement putty and carries a silicone polymer for it. It is not a waterproofing coat: Birla White itself says waterproof putty is not a solution for active leakage or seepage. Water pushing out from inside the wall lifts it like any other putty.

Can I use waterproof putty inside the house?

Yes. Birla White's WallSeal page lists exterior walls, and the brochure also lists inside walls that face moisture, such as the room side of a bathroom wall, a sink wall and a ground-floor wall that has shown damp. For a dry bedroom wall WallCare does the same job for less, see WallCare or Waterproof putty.

How much does a 40 kg bag cover?

About 640 to 760 sq ft in two coats, from Birla White's 1.49–1.77 sq m per kg. Take the 640 figure if the plaster is rough or old. A 10 × 10 ft room with ten-foot walls, one door and two windows is about 347 sq ft, so one bag does close to two such rooms.

How much water goes into a 40 kg bag?

Birla White says 36 to 38 per cent of the putty's weight: 360 to 380 ml for each kg, so 14.4 to 15.2 litres for the bag. Pour the powder into the water, stir with a machine for 3 to 5 minutes, and use the paste within 3 to 3.5 hours.

Do I need primer over waterproof putty?

WallSeal's own sheet does not ask for a primer. The Birla Opus paint sheets put one coat of primer over putty before the paint, and we follow the paint maker: one coat over either putty. See putty, primer, paint.

Can I sand waterproof putty smooth?

Not with ordinary sandpaper. Birla White warns that rough emery breaks the water-repelling film. If you must, use very fine waterproof paper, No. 500 or finer, and go lightly.

My wall is damp now. Will this stop it?

No. Find where the water comes from, stop it there, let the wall dry, then put the putty on. The six causes and the repair for each are in putty on a damp wall.

Why is there only the 40 kg pack on your shelf?

Because that is the pack the buyers here take. Birla White also makes it in 1, 5, 20 and 30 kg, and we can order any of them for you. Ask on WhatsApp for the time it takes.

Asian Paints and Berger have waterproof putty too. Which is better?

We sell Birla White, so we can only speak for it: its figures are on this page with the source named. A bag of another make has its own sheet. Whichever you buy, ask for the sheet and compare the same things: coverage per kg, water per kg, and what the maker says about leaks.

Mr Mustafaa
Paint Engineer, Tashya Ventures

Paint Engineer at our Reva Road store, Muzaffarpur. The figures on this page are Birla White's own, checked on 13 Nov 2026. Where its pages disagree, the page says so and gives the safer figure.

Where the numbers come from

  1. Birla White, WallSeal Waterproof putty page: white-cement putty, 2× water resistance, German silicon polymers, base on plaster, concrete and mortar, application area exterior walls. The page gives no coverage or water figure.
  2. Birla White, WallSeal application process: 360–380 ml water per kg, machine stirring 3–5 minutes, first coat on a pre-wetted wall, second coat after at least 3–4 hours.
  3. Birla White, WallSeal brochure and Waterproof putty vs regular putty: inside walls that meet moisture, both coats 1.5 mm, the warning on rough emery, 12 months.
  4. Birla White, Wall putty work: step-by-step process (25 Sep 2026): 1.5 mm total, gaps between coats.
  5. L&T-SuFin, WallSeal 20 kg listing (a seller's page): 1.49–1.77 sq m per kg, water 36–38%, paste life 3–3.5 hours, packs 1, 5, 20, 30, 40 kg, bag life 6 months (differs from the brochure; the safer one is used).
  6. Store facts: the 40 kg pack is on our shelf; 1, 5, 20 and 30 kg are ordered.

Send us the walls that get wet

We'll tell you which walls need waterproof putty, how many bags, and today's price, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com