Birla White Seep Blocker 2K in Muzaffarpur: for damp rising from the ground, how much you need, and today's price
Seep Blocker 2K is the coat we put on the inside face of a ground-floor wall that is damp from below. It is a two-part white coat (powder and liquid, mixed 2 : 1, no water), put on bare brick in two coats. 3 kg covers only 22.5 sq ft, so work out your wall before you buy. We keep the 3 kg pack; today's price is on the waterproofing rate board, with GST on the bill.
Not for the outside wall that gets rain: that is Seep Guard Vertical. Not sure which kind of damp you have? Damp, seepage or leakage.
A band of damp from the floor, with white salt: this is the coat.
The plain 2K is Birla White's two-part cementitious acrylic coat. It is made for bathrooms and kitchens, and the maker also lists walls, foundations and roofs. Because it is tested against water from both sides, it is the right coat for a wall you can only reach from the inside.
Use Seep Blocker 2K
Ground-floor wall damp from the floor up (usually 2–3 ft), wavy edge, white salt. Also a bathroom floor, a small leaking corner. Details of the damp: seelan from plinth to roof.
Use Seep Guard Vertical
The outside face of a wall that gets rain, and the plinth face. Rain-facing walls only: Seep Guard Vertical.
Fix the water first
A pipe, a roof or an outside drain feeding the wall: mend that first. A coat holds a damp wall; it does not cure its source. How to tell.
Be straight about what it does. Birla White's pages do not use the words "rising damp" for this product. It is tested against water pressure from either side, and that is why we choose it. It holds the damp back for years if the ground outside stays below the plinth; it does not put a new damp-proof course into an old wall.
A 3 kg pack is a small pack. Measure the wall first.
Length × height of the band to coat, then divide by 7.5 for kilos. Coat up to about 1½ ft above the highest damp mark (usual practice), so a 3 ft damp band becomes a 4½ ft coat.
Area —
Seven steps, in this order
- Stop what feeds the wall.Bring outside soil, a raised road or a drain below the plinth level.
- Take the damp plaster offdown to the brick, to about 1½ ft above the damp line (usual practice). Brush off the salt. Birla White says the surface must have no chalking, loose sand, paint, oil or grease.
- Let the brick dry.Test by touch and colour; it can take weeks after the cause is fixed.
- Mix.Two parts powder to one part liquid, no water. Add powder slowly into the liquid, mix smooth, let it stand 5 minutes (Birla White).
- Coat 1, then coat 2 at right angleswith a brush. Leave 6–8 hours between coats. Not above 35 °C surface heat or in afternoon sun.6–8 h between coats
- Cure.Air-dry 3–6 hours, keep damp for 2–3 days (spray or wet sacking), then dry 3–4 days.about a week
- Plaster over it(see the layers below), then let it dry before putty.
Plaster, putty, primer, paint: in that order, once dry
Re-plaster over a bond coat made with Seal & Dry SBR, with WP+200 in the plaster mortar. When the wall is completely dry (by touch and colour, usually a few weeks after the leak is fixed), put Waterproof putty, then primer, then paint. The order for putty and paint: putty on a seelan wall.
The same coat goes under bathroom tiles: waterproofing a bathroom has the pond test and the quantities. For the whole story of seelan in a Bihar house: from plinth to roof.
| Figure | Seep Blocker 2K |
|---|---|
| Mix | 2 : 1 powder : liquid |
| Coverage | 7.5 sq ft/kg (2 coats) |
| Between coats | 6–8 h |
| Stretch | up to 90% |
| Pressure | up to 5 bar |
What we sell and what goes with it
Today's price for each pack is on the waterproofing rate board, with GST on the bill. Anything not on the shelf we can order for you; ask on WhatsApp for the time it takes.
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
Seep Blocker 2K, 3 kgPowder + liquid · 22.5 sq ft in two coats · on our shelf₹ 358per 3 kg Seep Blocker 2K, 15 kg112.5 sq ft in two coats · we order it for youAsk today's rateper 15 kg Seal & Dry SBRBond coat before plasterAsk today's rate1 kg / 20 kg UltraTech WP+200In the plaster mortarAsk today's rateper litre Birla White Waterproof puttyOver dry plaster · 40 kg₹ 1,405per 40 kg Seep Guard VerticalOutside walls that take rain · 15 kg₹ 2,467per 15 kgSeep Blocker 2K or Hi-Flex? Hi-Flex vs Seep Blocker 2K. How much for a bathroom or roof: waterproofing calculator. Cutting and delivery are charged separately; delivery.
Short answers
Is Seep Blocker 2K for rising damp?
We use it for that, on the inside face of the lower wall. Birla White tests it against water pressure from either side (5 bar) and sells it for walls, foundations, bathrooms and roofs. Its pages do not name rising damp. So it holds the damp back; it does not stop the ground feeding the wall. Keep outside soil and drains below the plinth as well.
What is the difference between Seep Blocker 2K and Seep Guard?
Seep Guard Vertical is a coat for outside walls that take rain. Seep Blocker 2K is the two-part coat for bathrooms, small leaks and damp that comes up from the ground. For the outside wall see Seep Guard Vertical.
How much does a 3 kg pack cover?
22.5 sq ft in two coats, at 7.5 sq ft per kg for both coats (Birla White warranty booklet). A wall strip 12 ft long and 4.5 ft high needs 7.2 kg, so three packs. The calculator above does your own wall.
What is the mixing ratio?
Two parts powder to one part liquid by the maker's measure. No water. Mix smooth, let it stand 5 minutes, then brush on (Birla White warranty booklet). Birla White's Pro 2K sheet gives 3 parts powder to 2 parts liquid, so use the ratio printed on your own pack if it differs.
Can I put it on plaster, or must it be bare brick?
On a damp wall take the old plaster down to the brick first, as far as the damp goes. A coat on top of damp plaster has nothing sound to grip.
How long between coats, and how long before plaster?
6 to 8 hours between coats (Birla White's booklet; one blog says 5–6). Then 3–6 hours to air-dry, 2–3 days kept damp, and 3–4 days dry before the next layer goes on.
How many coats?
Two, the second at right angles to the first.
Does it carry a warranty on a damp wall?
Birla White's 3-year warranty is for the areas in its booklet (bathroom, kitchen, sunken floors), with at least 12 kg used on one surface and registration within 30 days. A damp wall strip is not named there, so we do not promise the warranty for it. Keep the bill anyway.
Is it the same as Seep Blocker Pro 2K?
No. Birla White's pages mix the two names. Ours is the plain 2K, up to 90% stretch. The Pro 2K sheet gives other figures (a 12 kg pack, stretch up to 174%). Ask us if you want Pro 2K and we will order it.
What is the price of Seep Blocker 2K 3 kg in Muzaffarpur?
Today's price is on the waterproofing rate board, with GST on the bill. We keep the 3 kg pack on the shelf; the 15 kg pack we can order for you. Ask on WhatsApp for the time it takes.
Can it go on a water tank or a roof?
Birla White lists roofs, terraces and foundations too, but Blocker 2K is not for drinking-water tanks: inside a tank that holds drinking water we use UltraTech Weather Pro Single Component, which we can order for you. For a bathroom, see waterproofing a bathroom. For a roof we advise Hi-Flex; the two are compared on Hi-Flex vs Seep Blocker 2K.
Paint Engineer at our Rewa Road store, Muzaffarpur. The figures here are Birla White's own, checked on 13 Nov 2026. Where its pages differ, the page says so and takes the safer one.
Where the numbers come from
- Birla White, Seep Blocker 2K product page: two-part cementitious acrylic coat, up to 5 bar, up to 90% elongation, 3-year warranty, a food-grade claim we do not use for drinking-water tanks; mixing, coverage and packs are not on the page.
- Birla White, Seep Guard Seep Blocker 2K warranty booklet: 2 parts powder to 1 part liquid, no water, 6–8 h between coats, 3–6 h air-dry, 2–3 days moist cure, 3–4 days dry, 7.5 sq ft per kg, 12 kg minimum, registration within 30 days, no application above 35 °C surface.
- Birla White, How to fix damp walls: names Seep Blocker 2K for bathrooms, kitchens and interiors (90% elongation, 1.49 mm crack bridging); rising damp described, no fix named. Hence our wording above.
- Birla White, How to prevent seepage with Seep Blocker 2K: roofs, terraces, walls, foundations; clean the surface, two coats.
- Birla White, Pro 2K warranty card: a different product (3 : 2 mix, 7.5–8.0 sq ft per kg, 12 kg pack); used here only to show where the two differ.
- Store facts, damp height of 2–3 ft and 1½ ft margin: our own shelf at Rewa Road and houses we see in Muzaffarpur, labelled usual practice.
Send us your wall
Send length, height and a photo of the damp band on WhatsApp. We will tell you how many packs, and today's price.