UltraTech Weather Pro WP+200
A liquid for the mixing water of slab concrete, plaster and mortar: 200 ml for every 50 kg bag of cement. You use it while building, and in the mortar of a repair.
Cannot be brushed on a wall that is already built.
Ignore where the wall is wet. Find where the water gets in, and the product follows.
One product does not fit all of these. The common waste is the right product on the wrong face of the wall, or on a wall that is still taking water. We keep six of these on the shelf, plus waterproof putty, and can order the rest. Every one has a page and a bill.
Tap the one that sounds like yours. The table below has all of them, and each answer links to the page that explains it.
Tap a problem above.
| Your situation | Where the water comes from | Use | Not this |
|---|---|---|---|
| Building a new house | Slab, plaster, plinth: not yet built | WP+200 in every bag of cement (200 ml per 50 kg bag). Hi-Flex on the roof and in bathrooms. | Skipping a batch: the batch without it is where the roof leaks.Waterproofing while building |
| Roof or parapet leaks (existing house) | Rain or standing water through slab cracks and the parapet corner | Hi-Flex, two coats, then a screed; WP+200 in the repair mortar. On a sound slab, Seep Guard Horizontal is the other choice. | Any coating while it is raining or the slab is wet.Chhat se pani tapak raha hai |
| Bathroom leaks into the room below | Gaps round pipes, the floor trap, floor-to-wall corner | Seal & Dry SBR in the base coat, then Hi-Flex under the tiles. | Tiling first and testing later.Bathroom waterproofing |
| Ground-floor wall damp low down, wavy line, white salt | Ground water rising inside the wall | Seep Blocker 2K on the inside face, above the damp mark; waterproof putty and paint over it once dry. | Seep Guard (it is for rain, outside). Paint or putty on the wet wall.Seelan, seepage, leakage: which one is yours |
| Outside wall wet after rain | Rain soaking through plaster and hairline cracks | Seep Guard Vertical on the outside face of an existing wall, then exterior paint. In new plaster, WP+200 in the mix. | Seep Blocker 2K on the inside for a rain problem.Exterior paint for Bihar rain |
| Small leak: corner, pipe sleeve, patch, loose tile | One spot, not a whole surface | Seal & Dry SBR with cement as a repair mortar or bond coat. | Using it as the only protection for a roof.SBR: how to use |
| Drinking-water tank, inside | Water held in the tank | UltraTech Weather Pro Single Component (food-grade approved by CFTRI). Not on our shelf: we order it. | Hi-Flex or Seep Blocker 2K inside a drinking-water tank.Where is the leak coming from |
| Wall wet near a pipe, even in dry weather; or damp corners only in monsoon | A leaking pipe, or damp air: not a roof, wall or ground leak | No waterproofing product. Fix the pipe (plumber), or let air and sun in. | Coating the wall: the water comes back.Leaking pipe joint |
The same house, cut through. Each number is a different place and a different product. Pages for each place (bathroom, terrace, plinth, parapet) go deeper than this page does.
Add WP+200 to every bag for the slab, plaster and plinth, give the roof its fall, and plan Hi-Flex on the roof and bathrooms before the rains. Waiting for the first leak costs more.
A wet patch shows where water comes out, not where it gets in. Do the free tests, then pick from the table above.
Rain hits the outside face of a wall. Seep Guard Vertical goes there, and only there.
Damp from the ground rises inside the wall. A coat on the outside face can be bypassed by the water from below, so the answer for that is Seep Blocker 2K on the inside face, up past the damp mark. Not sure which kind you have? Six tests before you buy and seelan, seepage, leakage sort it out.
Whichever you use, stop the water first, let the wall dry fully (test by touch and colour, usually a few weeks after the leak is fixed), and only then putty and paint: putty on a seelan wall.
Packs are the ones we keep. Ask for any other pack or product and we order it; WhatsApp for the time it takes. Today's price is on the
Prices are from our latest bill and change often. Please confirm today's rate on WhatsApp or call before buying.
waterproofing rate board, and every sale has a GST bill.A liquid for the mixing water of slab concrete, plaster and mortar: 200 ml for every 50 kg bag of cement. You use it while building, and in the mortar of a repair.
Cannot be brushed on a wall that is already built.
A two-part flexible coating for roofs, terraces and bathroom floors. 1 kg covers 14–15 sq ft for one coat, and two coats are needed. Stretches up to 100%. UltraTech asks for a screed or plaster over it.
Not for the inside of a drinking-water tank, and not a finish to walk on bare.
A rubber latex mixed into cement for a bond coat, a repair mortar, a pipe sleeve, a leaking corner or a base coat under tiles.
Not a roof coating on its own. For a whole roof use Hi-Flex.
A white cement and polymer coat for the outside face of walls that take rain. 8-year Birla White warranty with its system. 14–25 sq ft per kg, plan on the lower figure.
Outside rain-facing walls only. Not for damp rising from the ground.
The Seep Guard for horizontal RCC and concrete surfaces such as a terrace. Birla White gives an 8-year warranty and up to 7 bar pressure; a primer coat then two coats laid crosswise, 4–6 hours apart, 1.5 mm in all. Birla White quotes a 6–8 °C surface cooling (its figure).
Birla White gives no stretch figure for it. On a roof with moving cracks, Hi-Flex is the safer coat; send us a photo.
A two-part coat for the inside face of a wall that is damp from the ground, put on bare brick in two coats and taken above the damp mark. Also small jobs: a bathroom corner, a leaking patch.
A 3 kg pack covers a strip of wall, not a room. Not for the outside wall that gets rain, and not for drinking-water tanks.
The coat for the inside of a tank that holds drinking water. UltraTech lists it as food-grade approved by CFTRI. 1 kg mixed with 350–380 ml of water covers 11 sq ft in two coats, 2–3 hours apart.
Do not use Hi-Flex or Seep Blocker 2K inside a drinking-water tank.
A putty for damp-prone and outside walls, put on after the leak is fixed and the wall is dry, before primer and paint.
A finish layer, not a leak stopper. Water behind it still comes through.
Dr. Fixit's dealer finder lists only four dealers in all of Bihar when we looked, and UltraTech keeps its figures in a PDF. We stock the products, explain them in plain words and deliver; see delivery.
For a roof with cracks, UltraTech Weather Pro Hi-Flex: two coats at least 8 hours apart, 1 kg per 14–15 sq ft per coat, then a screed on top (UltraTech). On a sound slab, Birla White Seep Guard Horizontal is the other choice. WP+200 goes into the concrete and the repair mortar either way. Details on the terrace page.
Birla White Seep Blocker 2K on the inside face of the wall, taken above the damp mark. Seep Guard is for rain on outside walls and does not fix damp rising inside the wall.
No. Inside a tank that holds drinking water we use UltraTech Weather Pro Single Component, which UltraTech lists as food-grade approved by CFTRI. It is not on our shelf: we order it for you.
It is not a paint. It is a liquid you mix into the water for concrete, plaster and mortar: 200 ml for every 50 kg bag of cement (UltraTech). It cannot be brushed onto a finished wall.
The rate depends on the product and pack, and the day. Today's price for every pack is on our waterproofing rate board; or WhatsApp a photo of the leak and we will tell you what to buy and what it costs.
Yes. Delivery is charged separately from the material price; ask for the amount for your site. Every sale has a GST bill. For packs not on the shelf, we order them.
Send photos on WhatsApp, before dhalai or before plaster if you are building, and we will look at them with you. If you are not building, start with the six tests on the leak-finding guide.
Works on paint, putty and waterproofing at our Reva Road store, Muzaffarpur. Figures on this page are from the makers' own sheets, read on 14 Nov 2026; where a maker gives no figure, the page says so.
Send a photo of the wet patch, and one of the roof or wall outside it. We tell you which product, how much, and the price for today.