हिंदी Call90310 74624
Home›Putty›Compare
Putty compared · Birla White

WallCare or Waterproof putty: what the extra money buys, and which walls need it

The short answer
  • A dry inside wallbedrooms, hall, stairs, ceilings under a sound roofWallCare
  • A wall that gets wetback of a bathroom, sink wall, low ground floor, outside wall, old seelanWaterproof
  • A wall that is wet right nowstain spreading, paint bubbling, salt coming outStop the water first

Both putties do the same job, the same way: two thin coats that make the wall smooth for paint. The waterproof one (Birla White WallSeal) holds off water at the face of the wall better. Neither one stops a leak.

2×
WallSeal's water resistanceAgainst a normal cement putty, as Birla White rates it.
Same
Coats, thickness, spread2 coats, 1.5 mm at most, about 16 sq ft per kg for either.
Ask rate
Extra per 40 kg bagWallSeal over WallCare, from today's rate.
Where the water comes from decides it
WallCare and WallSeal against water from the room side and from inside the wall Four wall sections. Top row, water splashing on the room side: WallCare holds off some of it; WallSeal makes it bead up and run off. Bottom row, water coming through the brick from a leak or rising damp: under both putties the paint blisters and peels. The fix for the bottom row is to stop the water first. WALLCARE WALLSEAL 1 · Water on the room side bathroom splashes, steam, rain on an outside wall Holds off some water-resistant, per its sheet Beads up, runs off 2× a normal cement putty 2 · Water from inside the wall leaking pipe, rising damp, roof or parapet seepage Blisters, peels Blisters, peels No putty fixes row 2. Stop the water, let the wall dry, then WallSeal.
Not to scale. Layers from the left: brick, plaster, putty, paint, room. "2×" and "not for active leaks": Birla White's WallSeal page and its waterproof-vs-regular post.
Side by side

Same work on the wall. The difference is what happens when water hits it.

Every line is from Birla White's own brochure or product page for each putty. The blue cells are where WallSeal is ahead.

 WallCareWallSeal Waterproof
What it is
Made ofWhite cement, "Extra HP" (hydrophobic) polymers, mineral fillersWhite cement, hydrophobic polymer, silicone polymer, graded fillers
Against waterMaker's own words"Water-resistant"; resists dampness on the painted surface2× the water resistance of a normal cement putty
Water soak-in testKarsten tube, at 28 days≤ 0.8 ml over 24 hours≤ 0.3 ml over 30 minutes
Grip on plasterTensile adhesion, 28 daysabove 1.0 N/mm²at least 1.0 N/mm²
Where the maker says to use itInside walls, repaintingInside walls, and outside walls that face rain, moisture and humidity
Putting it on
Wet the wall firstYes, and keep it wet while applyingYes, a must
Water per 1 kg360–400 ml (36–40%)360–380 ml (36–38%)
Use the mixed paste within2–3 hours3–3.5 hours
Coats22
Both coats together≤ 1.5 mm≤ 1.5 mm
Gap between coatsat least 3 hoursat least 3–4 hours
Dry before primer or paintovernight, 10–12 hours24 hours if you can
SandingNot needed. If you must, only very fine waterproof emery, No. 500 or finer. Rough paper breaks the water-repelling film on both.
Curing with waterNone for either
Buying it
Spread, 2 coatsOn a smooth wall1.5–2.0 sq m per kg (16–21 sq ft)16–19 sq ft per kg
Bag sizes made1, 5, 20, 30, 40 kg1, 5, 20, 30, 40 kg
On our shelf1, 5, 20, 40 kg40 kg · other sizes we order for you
Use within12 months of making12 months of making
Today's price, 40 kgAsk rateAsk rate

Read the soak-in test carefully. Birla White ran it for 24 hours on WallCare and 30 minutes on WallSeal, so the two numbers can't be set against each other directly. The maker's own comparison is the "2×" against a normal cement putty. It does not publish a straight WallSeal-against-WallCare figure, and we won't make one up.

For the extra rupees per bag

What WallSeal buys you, and what it doesn't

At the counter the question is always "is waterproof putty worth it?" On the right walls, yes. On a leaking wall, it is money thrown at the wrong problem.

1A face that sheds water

WallSeal carries a silicone polymer on top of the water-repelling polymer both putties share. Water that lands on the wall, from a bucket, a shower, steam, or rain on the outside face, beads up instead of soaking into the putty under the paint.

2Paint that stays on longer on damp-prone walls

When the putty under the paint stays drier, the paint is less likely to flake and patch. That is what you are paying for on a bathroom's back wall, a sink wall, or a ground floor that gets damp every monsoon. On a dry bedroom wall there is nothing to hold off, so WallCare does the same job.

✕It does not stop a leak

Birla White says it plainly: waterproof putty is not a solution for active leakage or seepage. Water pushing out from inside the wall lifts any putty. Stop it at the source first:

The primer question. WallSeal's sheet says no primer is needed before paint. The Birla Opus paint sheets put a primer coat over putty before the paint. We follow the paint maker: one coat of primer over either putty. It costs little and the paint goes on evenly. Full order of layers: putty, primer, paint.

Wall by wall

Most houses here need both: WallCare for most walls, WallSeal for a few

Buying WallSeal for the whole house wastes money. Buying WallCare for the wet walls means repainting them sooner. Here is how we split it for houses in Muzaffarpur.

Which putty goes where
Section of a two-storey house with walls marked for WallCare or WallSeal Red lines mark WallCare: inside faces of dry walls and the top-floor ceiling. Blue lines mark WallSeal: the bedroom side of the bathroom wall, the kitchen sink wall, ground-floor walls near the ground in a low-lying area, outside faces and the parapet, and the first-floor wall with an old damp stain, once the leak is fixed. BathroomBedroom / hallBedroomKitchen 1 2 3 4 5 6 WallCare WallSeal Waterproof Wavy line: water standing in the lane in the monsoon
Lines show the face that gets putty. Inside bathroom walls are usually tiled up to the dado, so the putty question there is the wall above the tiles and the bedroom side.

1Bedrooms, hall, stairs, ceilings

WallCare

Dry inside walls are most of the house. WallCare is already water-resistant and gives the same smooth base. No reason to pay more here. Ceilings too, as long as the roof above does not leak.

2The room side of a bathroom wall

WallSeal

Water from the shower and bucket gets into the wall from the bathroom side, and the bedroom paint on the other face is where it shows. Also the bathroom wall above the tiles, which takes steam every day.

3Kitchen sink wall

WallSeal

Splashes and wiping every day. Birla White's WallSeal brochure shows kitchens and bathrooms among its uses.

4Ground floor in a low-lying mohalla

WallSeal

Where water stands in the lane every monsoon, ground-floor walls stay damp for weeks even without a leak. WallSeal on these walls, at least on the lower part. If the paint is already peeling at the bottom, that is rising damp: see 6.

5Outside walls and parapets

WallSeal or none

Many outside walls need no full putty: the Birla Opus exterior sheets only ask for holes to be filled before primer and paint. If you want putty outside, use WallSeal. Rain on the face is exactly what it is made for.

6Any wall that has had seelan

Water first

Find and stop the water, then let the wall dry fully. Test it by touch and colour; it is usually a few weeks after the leak is fixed. Only then WallSeal, primer and paint. Step by step: putty on a seelan wall · causes: deewar me seelan.

Bags for your house

Split the walls, then count the bags

Both putties spread about the same, so the split only changes which bag you buy, not how much. Quantities use Birla White's coverage figures for two coats. Buy for the high number if your plaster is rough.

Wall area of one room = 2 × (length + width) × height, less about 21 sq ft per door and 16 per window. A 12 × 10 ft room, 10 ft high, with one door and two windows, is about 387 sq ft of wall. For a whole room with its ceiling, use the paint calculator.

Your putty

WallCare, 2 coats—1.5–2.0 sq m per kg in two coats, about 16–21 sq ft (Birla White)—
WallSeal Waterproof, 2 coats—16–19 sq ft per kg on a smooth wall (Birla White)—
If every wall got WallSeal—What it would take, for comparison. Extra cost over the split: Ask rate
Putty totalAsk rate
Send this list on WhatsApp

Bag mix is worked out for the high number. Prices are filled in from today's rate: putty rates. WallSeal sizes other than 40 kg: we order them for you; ask on WhatsApp for the time it takes.

Questions people ask us

Short answers

Waterproof putty aur sadharan putty mein kya fark hai?

Both are white cement putties put on in two thin coats to make the wall smooth for paint. WallSeal Waterproof adds a silicone polymer, and Birla White rates it at twice the water resistance of a normal cement-based putty. Same job, same method; it holds up better on walls that get wet from the room side or from rain.

Does waterproof putty stop seelan?

No. Birla White says waterproof putty is not a solution for active leaks or seepage. Find and stop the water first, let the wall dry fully, then WallSeal, primer and paint. See putty on a seelan wall.

Is waterproof putty worth it for bedrooms and the hall?

On a dry inside wall, no. WallCare is already water-resistant and gives the same smooth base. Spend the extra on the walls that get wet: the bedroom side of a bathroom wall, the sink wall, low ground floors, outside walls and any wall that has had seelan.

Do they cover the same area? Is the labour the same?

Nearly the same area: Birla White gives WallCare 1.5–2.0 sq m per kg in two coats (about 16–21 sq ft) and WallSeal 16–19 sq ft per kg. Plan on about 16 sq ft per kg for either, so one 40 kg bag does roughly 640 sq ft in two coats. The work is the same two coats with a blade, so painters usually charge the same rate for both (usual practice; agree it before work starts).

Is primer needed over waterproof putty?

The WallSeal sheet says no primer is needed before paint. The Birla Opus paint sheets put a primer coat over putty. We follow the paint maker and apply one coat of primer over either putty: it costs little and the paint goes on evenly.

Can WallCare go on outside walls?

Birla White's WallCare product page lists interior walls only. For outside walls that take rain we give WallSeal, which is made for walls exposed to rain, moisture and humidity. Many outside walls need no full putty at all: the Birla Opus exterior sheets only ask for holes to be filled.

The painter is sanding the putty hard. Is that a problem?

Yes, for both. Birla White says rough emery breaks the water-repelling film on the putty. If the surface needs levelling, only very fine waterproof emery, No. 500 or finer, used gently. Then wipe off the dust before primer.

The wall has white salt coming out. Which putty?

Neither fixes that on its own. White salt means water is moving through the wall and carrying salt out. Stop the water first: see white salt on the wall. Birla White also makes a Saltblock anti-efflorescence putty; we can order it for you; ask on WhatsApp for the time it takes.

How do I know the painter used the waterproof one?

Look at the bag. WallSeal comes in a blue bag with a yellow umbrella on it and "Waterproof Putty" printed under the name. WallCare's bag is white with blue and green brush strokes. Keep our bill: it names the product and the number of bags.

Mr Mustafaa
Paint Engineer, Tashya Ventures

Paint Engineer at our Reva Road store, Muzaffarpur. Every figure on this page was checked against Birla White's own brochure and product page for each putty on 12 Nov 2026. Where two sheets disagree, the page says so and gives the safer choice.

Where the numbers come from

  1. Birla White, WallSeal Waterproof Putty brochure: 2× water resistance, scope (inside, and outside walls exposed to rain, moisture and humidity), 36–38% water, use within 3–3.5 h, 3–4 h between coats, 24 h before paint, ≤1.5 mm, no rough emery (No. 500 or finer), "no primer is required", coverage 16–19 sq ft/kg, Karsten tube ≤0.3 ml (30 min, 28 days), tensile ≥1.0 N/mm² (EN 1348).
  2. Birla White, WallSeal product page (FAQ): ingredients, "2 times more resistant than any normal cement-based putty", pre-wetting, 2 coats, no curing, packs 1/5/20/30/40 kg, 12-month expiry.
  3. Birla White, WallCare Putty brochure: water-resistant with Extra HP polymers, interior walls (the product page lists interior only), 36–40% water, use within 2–3 h, 3 h between coats, overnight or 10–12 h to dry, ≤1.5 mm, No. 500 emery only, 1.5–2.0 sq m/kg in two coats, Karsten tube ≤0.8 ml (24 h, 28 days), tensile adhesion >1.0 (EN 1348), packs 1/5/20/30/40 kg.
  4. Birla White, WallCare product page (FAQ): pre-wet, no curing, not a levelling material, use within 12 months.
  5. Birla White, Waterproof putty vs regular putty (25 Sep 2026): waterproof putty is a finishing layer, not a solution for active leakage or seepage; fix the source first.
  6. Birla Opus, Style Color Smart product information sheet: primer coat over putty before the paint.

Tell us your walls

Send the room sizes and which walls get wet. We'll send back WallCare and WallSeal bags, with today's price, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com