हिंदी Call90310 74624
Home›Products›Balu, gitti, eent
Eent · red clay bricks · Muzaffarpur

Eent in Muzaffarpur: which class for which wall, what size, and how many you need

The short answer

AWAL First class. Outside walls, walls that carry the roof, bathroom walls, and any wall that stays bare.

DOYAM Second class. Inside partitions, and boundary walls that will be plastered on both faces.

Order by the wall you are building, not by the lower rate. Bricks are quoted per 1,000 and billed per piece, with GST on the bill.

12%
GST on clay bricks6% if the kiln takes no input credit. Printed on the bill.
4.8 · 9.7
Bricks per sq ft of wall4.5 in wall and 9 in wall, for a 230 × 110 × 70 brick.
+5–10%
Add for breakageOn top of the wall count. Agree it before unloading.
A brick and a wall
A brick and a wall, to scaleTwo IS 1077 brick sizes drawn to scale, a half-brick wall face with one brick and joint marked 240 by 80 mm, and the plan of a 110 mm and a 230 mm wall. 1 · THE BRICK (mm) 230190 7090 230 × 110 × 70IS 1077 non-modular190 × 90 × 90IS 1077 modular 2 · FACE OF A 4.5 IN WALL 240 × 80brick + 10 mm joints 4.8 bricks in every sq ft of wall face 3 · FROM ABOVE: WALL THICKNESS 110 mm = 4.5 in230 mm = 9 in One brick across.1 layer: 4.8 per sq ftTwo bricks across.2 layers: 9.7 per sq ft 230 × 110 × 70 brick, 10 mm joints. Drawn to scale.
One brick plus its joint covers 240 × 80 mm of wall. That is 52 bricks to the square metre, or 4.8 to the square foot. A 9 in wall has two layers, so it takes double.
Which wall, which class

Awal outside, doyam inside: wall by wall

Usual practice in North Bihar. If your engineer's drawing names a brick class, the drawing wins.

Top view of a house
House plan showing which walls take awal and which doyam eentTop view of a house inside a compound wall. Outer walls and bathroom walls are marked awal, inside partitions doyam, and the compound wall depends on whether it is plastered. roomhallroomkitchenbath 1234 ROAD SIDE awaldoyam
Dark red walls: awal. Light walls: doyam.
  1. 1Outside walls: awalThey take rain and sun, and the slab or roof rests on them. Plastered or bare, give them awal.
  2. 2Inside partitions: doyam is enoughPlastered on both faces, carrying only their own weight.
  3. 3Bathroom and wet walls: awalA soft brick soaks up more water. IS 1077 allows up to 20% water by weight in common bricks, so ask for the harder, well-fired ones here.
  4. 4Boundary wall: depends on the faceBare face toward the road: awal. Plastered both sides: doyam.
Jhama (over-burnt, dark, often bent) is not for walls: it is broken up for soling under floors. The class pictures and the ring, scratch and soak tests are on the rate page and in checking brick quality. Where eent sits in the whole house: balu, gitti, eent.
Size and strength

What IS 1077 says, and what to ask for

1Size

IS 1077 lists two common sizes: modular 190 × 90 × 90 mm and non-modular 230 × 110 × 70 mm. Kilns do not all cut to one size. A brick 10 mm taller needs about 11% fewer bricks for the same wall, so settle the size before you compare rates. Check it with ten bricks in a row, below.

2Strength

IS 1077 sorts common bricks by average crushing strength, from 3.5 N/mm² up to 35 N/mm² (3.5, 5, 7.5, 10, 12.5, 15, 17.5, 20, 25, 30, 35). With an RCC frame the brick only fills in. A house without columns, where the walls carry the roof, needs the class named in the drawing: send it to us and we will tell you what we can supply.

3Water and white salt

Water absorption not more than 20% by weight up to class 12.5, and 15% above. White salt patches (efflorescence) not worse than moderate up to class 12.5, and slight above. Both show up on plastered walls after the first rains. A home soak test is in the quality guide.

Limits are from the 1992 edition of IS 1077. BIS has circulated a revised edition in draft, so confirm the current edition before you quote a class on a drawing.

How many bricks

How many eent for your walls

Count the wall area, not the floor area. Guides online give anything from about 5,000 to over 40,000 bricks for a "1,000 sq ft house" because they count different things.

Brick size

Outside walls

Inside walls

Joints taken as 10 mm. Run = the length of all walls of this kind added up. Door about 21 sq ft, window about 16 sq ft.

Your count

Outside walls——
Inside walls——
Bricks in the walls—Exact count, no breakage
Order about—5% to 10% over the wall count, rounded up to the next 100
Material totalAsk rate
Ask for today's price

Prices are filled in from today's rate. Today's rate per 1,000: balu, gitti, eent rate.

Worked example, ground floor of about 1,000 sq ft. Outside walls 130 ft long × 10 ft high, 9 in thick, less 150 sq ft of doors and windows: 1,150 sq ft × 9.7 = about 11,100 bricks. Inside partitions 90 ft × 10 ft, 4.5 in thick, less 100 sq ft: 800 sq ft × 4.8 = about 3,900. Together about 15,000, and 5% for breakage makes about 15,800. If your drawing has 4.5 in outside walls on an RCC frame, the count is much lower. Wall thickness is the biggest swing.

Usual practice: a tractor trolley takes roughly 1,500 to 2,000 bricks of the 230 mm size, a truck several times that. We confirm the load when you order. Mortar for this brickwork: cement, sand, aggregate calculator, and the bag we suggest for brickwork is UltraTech PPC. More tools: brick calculator.

When the bricks arrive

Five checks, two minutes, before you sign

Ten bricks, end to end
Ten bricks in a rowTen 230 mm bricks laid end to end measure 2,300 mm, 7 ft 6.5 in. Ten 190 mm bricks measure 1,900 mm, 6 ft 3 in. 10 BRICKS, 230 MM LONG 2,300 mm = 7 ft 6½ in 10 BRICKS, 190 MM LONG 1,900 mm = 6 ft 3 in touching, no mortar
Lay ten bricks touching on flat ground and measure the row.
  1. 1Ten in a row. A 230 mm brick gives 2,300 mm (7 ft 6½ in); a 190 mm brick gives 1,900 mm (6 ft 3 in). A row that is clearly short means a smaller brick than you were quoted, and you will need more of them.
  2. 2Pick from the middle of the stack as well as the top. Usual practice: this way the sample reflects the whole load, not just the top layer.
  3. 3Ring, scratch, soak. Struck together, a good brick rings. A fingernail leaves no mark. Soaked a day, it gains no more than 20% in weight. Details: brick quality check.
  4. 4Agree breakage first. Count the broken pieces, not the whole load. Ask for the bricks to be stacked by hand, because tipping a trolley breaks more (usual practice).
  5. 5Class and count on the bill, with the 12% GST shown. Delivery times and charges: delivery.
Questions people ask us

Short answers

How many bricks do I need for a 1,000 sq ft house?

It depends on the walls, not the floor area. Each sq ft of 4.5 in wall takes about 4.8 bricks and each sq ft of 9 in wall about 9.7 (230 × 110 × 70 mm brick, 10 mm joints). A ground-floor house of about 1,000 sq ft with 9 in outside walls and 4.5 in partitions comes to roughly 15,000 bricks with breakage; the worked example above shows the sums. Put your own wall lengths in the counter.

What is the difference between awal and doyam eent?

Awal is first class: even colour, sharp edges, a clear ring when two are struck. Doyam is second class: patchy colour, some chipped corners. In North Bihar awal goes into outside walls, load-bearing walls and wet walls, and doyam into inside partitions and boundary walls that will be plastered. The class names are local usage; IS 1077 grades bricks by crushing strength instead.

Is eent sold per brick or per 1,000?

The rate is quoted per 1,000 and the bill counts pieces. So "1,000" means a thousand bricks, not a weight or a volume. Agree the breakage allowance before the load is unloaded.

How much GST is charged on bricks?

12% on clay bricks, or 6% when the kiln does not take input credit, after the September 2025 changes (Business Standard, 18 Sep 2025). The rate is printed on our bill.

What is the standard size of a brick?

IS 1077 lists 190 × 90 × 90 mm (modular) and 230 × 110 × 70 mm (non-modular). Kilns do not all cut to one size, so lay ten bricks end to end: 2,300 mm means a 230 mm brick, 1,900 mm a 190 mm brick.

Can I use doyam eent for an outside wall?

We would give awal for any outside wall, because it takes the rain and the sun. Doyam is for walls that will be plastered on both faces and are not exposed, such as inside partitions. A boundary wall with both faces plastered can take doyam; a bare face toward the road should be awal.

Fly ash bricks or red clay eent?

This page is about red clay eent. The weighing of the two is on the fly ash or red brick page.

Abhishek Ranjan
Diploma Civil Engineer, Tashya Ventures

Civil engineer at our Reva Road store, Muzaffarpur, advising on cement, steel and building work. The sizes, strength classes and limits on this page were checked on 13 Nov 2026 against a published summary of IS 1077:1992. The bricks-per-sq-ft figures are our own arithmetic, shown on the page. Local class names and trolley loads are usual practice and are labelled so.

Where the numbers come from

  1. IS 1077:1992, Common burnt clay building bricks, as summarised on civilblog.org: sizes 190 × 90 × 90 and 230 × 110 × 70 mm; strength classes 3.5 to 35 N/mm²; water absorption 20% (up to class 12.5) and 15% above; efflorescence moderate and slight.
  2. Bureau of Indian Standards, draft revision of IS 1077: the 1992 edition is under revision.
  3. Business Standard, GST 2.0: bricks stay under the special scheme at 12% (18 Sep 2025).
  4. NoBroker forum, "How much bricks required for 1000 sq ft house": answers from about 5,000 to about 46,800 bricks, the spread explained above.
  5. Bricks per sq ft: our own arithmetic, 92,903 mm² per sq ft ÷ (brick length + 10 mm) ÷ (brick height + 10 mm), with 10 mm joints as usual practice. Breakage allowance, trolley loads and the awal and doyam names: usual practice in North Bihar.

Send us your wall lengths

We will send back the number of awal and doyam bricks for your walls, with today's price and delivery to your site.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com