हिंदी Call90310 74624
Home›Today's rate›Steel
Today's rate · Muzaffarpur

Sariya rate today: Tata Tiscon and Saluja Gold, per kg, quintal and piece

Thursday 12 Nov 2026 · set at — at our Reva Road store · changes every morning
Today's rate, 6 to 16 mm
Size12 m
piece
₹ per kg₹ per
quintal
₹ per
piece
6 mmrings2.66 kgAsk rateAsk rateAsk rate
8 mmrings4.74 kgAsk rateAsk rateAsk rate
10 mmslab7.40 kgAsk rateAsk rateAsk rate
12 mmslab, beam, column10.66 kgAsk rateAsk rateAsk rate
16 mmbeam, column, footing18.96 kgAsk rateAsk rateAsk rate
✓18% GST included ⚖Billed by weight on our scale +Cutting and delivery extra

Tata Tiscon 550SD. Piece weight is the standard weight of a 12 m bar from IS 1786. Per piece and per quintal are worked out from the per kg rate, so the three columns always agree. Tap a size to put it in your order list.

How heavy is one 12 m piece?
Weight of one 12 m sariya piece, by size Cross-sections of 6, 8, 10, 12 and 16 mm bars drawn to the same scale, each with a bar showing the weight of one 12 m piece: 2.66, 4.74, 7.40, 10.66 and 18.96 kg. 37.5, 21.1, 13.5, 9.4 and 5.3 pieces make a quintal. SIZE KG IN ONE 12 m PIECE (standard weight) 6 mm 2.66 kg 37½ pieces make a quintal 8 mm 4.74 kg 21 pieces make a quintal 10 mm 7.40 kg 13½ pieces make a quintal 12 mm 10.66 kg 9.4 pieces make a quintal 16 mm 18.96 kg 5.3 pieces make a quintal Twice as thick is four times as heavy: 16 mm ≈ 7 × 6 mm.
Circles are drawn to the same scale as each other, not real size. Weights: IS 1786 standard mass per metre × 12 m. Real bars run a little over or under, which is why we weigh.
Before you compare shops

What our rate covers, and what is extra

Two sariya quotes only compare if they cover the same things. Here is what ours does.

1GST: 18%, on the bill

TMT bars carry 18% GST, and every sale gets a GST bill. The switch on the table shows the rate both ways. When another shop gives you a lower number, ask whether it is before GST. The difference is about ₹ 18 on every ₹ 100.

2Weighed, not counted

Your bars go on our scale and the bill is kg × rate. The per piece column is a guide from the standard weight. A shop that quotes only per piece can hand you lighter bars for the same money, so always ask the kg.

3Cutting and delivery: extra

Cutting and delivery are charged separately; ask for the amount for your site. Tell us the village or mohalla and the sizes, and we send the full amount on WhatsApp before you pay. Details on delivery and cutting.

Order in mm, not soot. "4 soot" means 12 mm to one mason and 16 mm to another, because the old unit was never printed on a bar. Write the size in mm on your list. Soot to mm explains both readings.

Order list

Put in what your mistri wrote. We send back the bill amount.

Masons count in pieces, shops weigh in kg, and some people buy by the quintal. Enter any of the three and see the other two, then send the whole list on WhatsApp. Don't know the quantity yet? Use the sariya calculator first.

—

Your sariya list

Nothing yet. Add a size on the left, or tap a row in the rate table.
Total weight 0 kgAsk rate
Send this list on WhatsApp

Amount is today's rate with 18% GST, at standard weight. The bill goes by the weight on our scale. Cutting and delivery are added for your site. Need binding wire too? Add it in the message, or see binding wire.

Last 30 days

Is sariya getting cheaper or dearer?

Our own per kg rate, one point each morning. Steel moves with the market, so a month of rates tells you more than today's number alone.

Tata TisconSaluja Gold₹ per kg, with GST
Sariya rate per kg over the last 30 days Line chart of our daily per kg rate for Tata Tiscon and Saluja Gold. Records start on 12 Nov 2026. 14 Oct28 Oct12 Nov The line starts on 12 Nov 2026 and grows by one point every morning.
Every day's rate stays on rate history.

How to use the line

  • Line falling: no need to rush. Buy what the next stage needs.
  • Line climbing: buy the full lot for the slab in one go, so the rate cannot move between deliveries.
  • Flat: buy when the site is ready. Bars kept for months on wet ground rust; keep them off the soil and covered.
  • Why it moves: why the sariya rate changes.
Check the weight

What a 12 m piece should weigh, and how light it may be

IS 1786, the standard every TMT bar is made to, fixes a weight per metre for each size and allows a small margin either way. If your piece weighs less than the lowest figure here, ask why before you pay.

One 12 mm piece on the scale
Allowed weight of one 12 m piece of 12 mm sariya Scale from 9.8 to 11.5 kg. Standard weight 10.66 kg. A batch of 12 mm bars may weigh 5% either way, 10.12 to 11.19 kg. One bar on its own may be up to 6% light, down to 10.02 kg. Below that the bar is under the standard. 12 mm × 12 m 10.66 kg standard 10.010.511.011.5 kg 10.1211.19 Too light:ask why Within IS 1786 a batch may be 5% either way Heavier:more steel Hatched: one bar alone may be up to 6% light (10.02 kg).
Weigh a few pieces together, not one. IS 1786 judges a batch, and a single bar is allowed a little more margin.
Sizekg per metre12 m pieceLowest, batchPieces per quintal
6 mm0.2222.66 kg2.48 kg−7%37.5
8 mm0.3954.74 kg4.41 kg−7%21.1
10 mm0.6177.40 kg6.89 kg−7%13.5
12 mm0.88810.66 kg10.12 kg−5%9.4
16 mm1.5818.96 kg18.01 kg−5%5.3
Why this matters for your money. If a shop quotes per piece and its 12 mm pieces weigh 10.1 kg instead of 10.66 kg, you get about 5% less steel in the slab for the same money. Buying by weight protects you either way: you pay for exactly the steel on the scale. More on the maths: sariya weight per metre. What to check when the truck arrives: sariya delivery check.
Which brand, which size

Two brands on our shelf, five sizes, one rule: follow the drawing

What you buy should depend on the house and the drawing, not on the cheaper number.

Tata Tiscon 550SD

The higher-grade bar. Usually the higher rate per kg.
Fe 550SD6 · 8 · 10 · 12 · 16 mm
  • Tata's page gives a minimum yield strength of 570 MPa, above the 550 that IS 1786 asks for this grade, and ties the bar to earthquake design under IS 13920.
  • "Tata Tiscon" and the grade are rolled into every bar.
  • Sensible for a frame house of two floors or more, or wherever your engineer asks for 550-grade steel.
  • More: Tata Tiscon 550SD

Saluja Gold

The value bar. Made at Giridih, Jharkhand; comes to us through Birla Pivot.
Fe 5006 · 8 · 10 · 12 · 16 mm
  • The maker's range runs from Fe 500 to Fe 600. The bars we stock are Fe 500, the grade on our supplier's bill.
  • Sensible for a ground-floor house, a boundary wall or a shed, where the drawing calls for Fe 500.
  • Check the BIS (ISI) mark and licence number on the bar: asli ya nakli sariya.
  • More: Saluja Gold · Tata Tiscon vs Saluja Gold
Where each size usually goes
Usual sariya sizes in a house frame A simple concrete frame: slab bars 10 to 12 mm, beam bars 12 to 16 mm, column bars 12 to 16 mm, rings 6 to 8 mm wrapped around the column bars, footing mesh 12 to 16 mm. Slab (chhat) · 10–12 mm Beam · 12–16 mm Column · 12–16 mm Rings · 6–8 mm wrap the column and beam bars Footing · 12–16 mm
Usual sizes for a one- or two-storey house, from the makers' size guides. Your engineer's drawing decides the size and the number of bars.

What people usually buy, by job

  • Rings (stirrups): 6 or 8 mm, bent at the site. Ready-made rings (Tata Superlinks) we can order for you; ask on WhatsApp for the time it takes.
  • Slab: 10 or 12 mm, or what the drawing says. Which size for the chhat
  • Beams and columns: 12 or 16 mm main bars. Column size and bars
  • Footing: 12 or 16 mm mesh.
  • 20 mm and above: we can order it for you; ask on WhatsApp for the time it takes.
Send a photo of your drawing or bar list on WhatsApp before dhalai and we will go through it with you.
Questions people ask us

Short answers

What is the sariya rate today in Muzaffarpur? (aaj sariya ka rate kya hai)

It is in the table at the top, with the date and the time we set it. Tata Tiscon and Saluja Gold, 6 to 16 mm, per kg, per quintal and per 12 m piece, with or without GST. We set it every morning at our Reva Road store.

Sariya kitna rupya quintal hai?

One quintal is 100 kg, so the quintal column is the per kg rate × 100. In pieces, a quintal of 12 mm is about 9.4 pieces of 12 m, of 10 mm about 13.5, and of 8 mm about 21.

How much does one 12 m piece of 12 mm weigh? (12 mm sariya ka ek piece kitne kg ka)

10.66 kg by the standard weight in IS 1786, which is 0.888 kg per metre. The standard lets a batch of 12 mm bars be 5% lighter or heavier, so a piece can weigh from about 10.12 to 11.19 kg. That is why we weigh.

Is GST included?

TMT bars carry 18% GST, printed on our bill. Use the switch on the rate table to see the rate with GST or before GST. When comparing with another shop, compare like with like.

Do you sell by piece or by weight?

By weight. The bill is the kg on our scale × the rate. The per piece column is a guide worked out from the standard weight, so you can check a mason's piece count against money.

Why is Tata Tiscon dearer than Saluja Gold?

Tata Tiscon 550SD is a higher grade (Fe 550SD against the Fe 500 Saluja bars we stock) from a bigger maker, and it usually costs more per kg. Both meet IS 1786 for their grade. Which one your house needs is on Tata Tiscon vs Saluja Gold.

Are cutting and delivery included?

No. Cutting and delivery are charged separately; ask for the amount for your site. Send your bar list and location on WhatsApp and we reply with the full amount. See delivery.

How often does the rate change? (rate roz kab badalta hai)

We set it every morning and show the date and time above the table. On days the market moves a lot it can change during the day, so confirm on WhatsApp or by phone before you pay.

Where the numbers come from

  1. Bureau of Indian Standards, IS 1786:2008, High strength deformed steel bars: Table 1 (mass per metre: 6 mm 0.222, 8 mm 0.395, 10 mm 0.617, 12 mm 0.888, 16 mm 1.58 kg) and Table 2 (tolerance on mass: up to 10 mm ±7% batch, −8% single bar; over 10 to 16 mm ±5% batch, −6% single bar).
  2. Tata Steel, Tata Tiscon 550SD product page: grade 550SD, minimum yield strength 570 MPa, embossed brand and grade, design to IS 13920.
  3. Saluja Steel & Power, salujagold.com: plant at Giridih, range Fe 500 to Fe 600. Grade of our stock: Fe 500, from the item codes on our Birla Pivot bills.
  4. JSW Neosteel, How much steel is required for a house: usual bar sizes by part of the house.
  5. GST 18% on TMT bars (HSN 7214), as charged on our bills. Rates: our store, set each morning.

Send your bar list

Sizes and pieces, or a photo of the mistri's list. We reply with today's amount, cutting and delivery included, on WhatsApp.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com