हिंदी Call90310 74624
Home›Cost›House building cost
House cost · 1000 sq ft

1000 sq ft house cost in Muzaffarpur: the full material list, and what moves the total

The short answer
  1.  Material list × today's ratethe list on this page, for your structure
  2. +Labouryour thekedar's rate × 1000 sq ft
  3. +Outside the houseboundary, borewell, septic tank, doors, sanitary
  4. =Your 1000 sq ft house

A 1000 sq ft house is not one price. An RCC frame takes about twice the sariya of a house whose brick walls carry the lenter, and two floors of 500 cost differently from one floor of 1000. So this page gives the list for your 1000 sq ft at today's rate, not a round figure that fits nobody.

400–500
Cement bags, RCC frame350–420 if brick walls carry the slab.
3.5–4.5 t
Sariya, RCC frame, one floor1.5–2.2 t when brick walls carry the slab.
≈ 96
Bags in the lenter aloneA 5-inch slab over 1000 sq ft, 1:1.5:3 mix.
One plot, three different areas
A 25 by 40 ft plot with the house and the carpet area markedThe plot is 25 by 40 feet, 1000 sq ft of land. With 5 feet left open at the front and 3 feet at the back, the house covers 25 by 32 feet, 800 sq ft built-up. The carpet area is the floor inside the walls, about 80 percent of built-up. 3 ft open at the back5 ft open at the front ROAD 25 ft 40 ft Plot25 × 40 ft = 1000 sq ftland, not house Built-up area25 × 32 ft = 800 sq ftoutside wall to outsidewall: this gets priced Carpet areafloor inside the wallsabout 80% of built-up
Example only: your open spaces come from your naksha and the bye-laws. Carpet share: standard planning figure.
First, the area

Which 1000 sq ft do you mean?

The same number is used for three different things. Get this wrong and the estimate is wrong before the first bag is bought.

1A 1000 sq ft plot

25 × 40 ft of land. Leave open space at the front and back and the house is smaller, often 750 to 850 sq ft on one floor. Price the house, not the plot. Room layouts for this plot: 25 × 40 naksha.

21000 sq ft built-up, one floor

Covered area, outside wall to outside wall. Foundation and lenter both cover the full 1000 sq ft. Thekedars quote on this number, and the list below prices it.

3500 + 500 on two floors

Same built-up area, half the foundation and half the roof, but a second slab, a staircase, heavier columns and more outside wall to plaster and paint. Pick it in the list to see what changes.

One floor of 1000 sq ft beside two floors of 500 sq ftLeft, a wide one-storey house with one long foundation and one slab. Right, a narrow two-storey house with a foundation half as long, two slabs and a staircase. One floor of 1000 sq ftTwo floors of 500 sq ft foundation under 1000 sq ftfoundation under 500 sq ft One slab over the whole house.Less outside wall per sq ft. Two slabs, a staircase,columns sized for two floors. slabslabstair

Carpet area, the floor inside the walls, is about 80% of built-up (standard planning figure). Flats are sold on it. For building your own house, use built-up.

The biggest choice

Town RCC frame or village brick walls

This decides most of the sariya and much of the cement. It is also the one choice you cannot change after the foundation.

RCC frame and brick-wall house in cross-section, with the path of the roof loadLeft: the slab rests on beams, beams on columns, columns on a footing under each column; brick walls only fill the gaps. Right: the slab rests on thick brick walls with concrete bands at plinth and lintel (the slab is the roof band), and the walls stand on a stepped strip foundation along their whole length. Red arrows show the load going down. Town: RCC frameVillage: walls carry the slab slabbeamcolumn plinth beam brick wallonly fills a footing under each column slab slab = roof bandlintel bandplinth band thick brick wallcarries the roof strip foundation along every wall
Not to scale. Red arrows: where the weight of the roof goes. Bands in a brick-wall house: IS 4326, for earthquake zone IV.
Question about your houseIf yes
Will an upper floor come in the next few years?RCC frame, with footings and columns sized for it now
Is the plot filled land, soft soil or in a flood area?RCC frame, with a foundation designed by an engineer
Do you want a shop front or a wide hall without walls?RCC frame
One floor for good, firm ground, ordinary room sizes?Brick walls carrying the slab can work

Muzaffarpur is in earthquake zone IV (IS 1893). A brick-wall house here needs concrete bands at plinth and lintel, and with an RCC slab the slab itself is the roof band, as IS 4326 lays down for masonry houses in this zone. More on earthquake zone 4; whether a thin slab is enough: is a 4-inch lenter enough.

Your list

Everything a 1000 sq ft house takes, at today's rate

Choose your structure, floors, plinth and finish. Each line gives a low and a high number from standard planning figures and the makers' coverage. Buy to the high number; your engineer's drawing decides the final order.

1.5 ft is a normal plinth. Raise it if water stands on the plot in the rains: how high in a flood area.

Built-up 1,000 sq ft · ground floor 1,000 sq ft

Your 1000 sq ft list

Material totalAsk rate
Send this list on WhatsApp

Planning figures, not a bill of quantities. Labour, cutting and delivery are separate (delivery). For katha and dhur, a tin roof, G+2 or your own labour quotes, use the full house calculator.

How each line is worked out, figure by figure: house construction cost calculator. Deeper on one material: cement for 1000 sq ft · sariya per sq ft · bricks, counted from your walls · balu and gitti.

When the money goes out

A 1000 sq ft house is bought in six stages, not in one go

Order by stage. Cement kept for months loses strength and sariya left in the rain rusts, so buy each part of the list when the work needs it.

Six stages of building a house1 foundation and plinth, 2 columns and walls up to lintel, 3 the roof slab on shuttering, 4 plaster, 5 floor, pipes and wiring, 6 putty and paint. 1Neev and plinthfootings, plinth, filling 2Columns and wallsup to lintel, then to roof 3Lenter dayshuttering, sariya, pour 4Plasterinside and outside 5Floor, pipes, wiringtiles, bathroom, conduit 6Putty and paintafter the plaster dries
StageWhat you buyWorth knowing
1 · Neev and plinthCement, sariya for footings and the plinth beam or band, bricks, balu, gitti, fillingAnti-termite treatment goes in at this stage: termite treatment.
2 · Columns and wallsBricks (the biggest single order), cement and balu for mortar, column sariyaA lintel or lintel band over every door and window.
3 · Lenter (roof slab)About 96 bags for a 5-inch slab over 1000 sq ft, and 1.3–1.4 t of slab sariya; gitti, balu, binding wire, WP+200Conduit and pipe sleeves go in before the pour: dhalai checklist · sariya in the slab.
4 · PlasterCement and balu; WP+200 in the outside plasterWiring and pipe chases are cut before plaster, not after.
5 · Floor, bathroom, wiringTiles and tile adhesive, water and drain pipes, wire, sanitarywareWaterproof the bathroom floor before tiling: bathroom waterproofing.
6 · Putty, primer, paintWallCare putty, primer, Birla Opus paint inside and outPlaster cures 28 days and must be dry first: putty, primer, paint.

Slab figures: cement at 1:1.5:3, as worked on cement for chhat dhalai; slab sariya, standard estimate for a 1000 sq ft roof. Your slab drawing decides both.

Labour, on its own line

Labour is your thekedar's rate times 1000

We found no reliable published labour rate for Muzaffarpur, so we don't print one. Get two or three quotes for the same work and multiply.

1Labour-only, per sq ft

Rate × 1000 sq ft built-up. Ask what it covers: shuttering, scaffolding, curing, shifting material. Two equal rates can cover different work.

2Daily wage

Mistri and helper by the day, for small jobs and finishing. Bihar's legal minimum from 1 April 2026 is about ₹436 a day unskilled and ₹551 skilled; market rates are normally higher.

3Lenter-day lump sum

One amount for dhalai day. Ask the gang size, whether the mixer and vibrator are included, and who pays for curing.

How thekedars price a house, and the questions to ask: labour and thekedar rates.

Outside the 1000 sq ft

What a per-sq-ft figure leaves out

These sit outside the built-up area, so neither the list above nor most online rates include them. Give each its own line in your budget.

Every item, what it involves and how to budget it: what the cost includes and what it doesn't.

In a Bihar village

Building 1000 sq ft in a village

Delivery

Check whether a truck reaches the plot or only a tractor, and order full loads to cut trips. Cutting and delivery are charged separately; ask for the amount for your site.

Plinth

If water stands on the plot in the rains, raise the plinth first. Set the height in the list above and watch the bricks and filling grow.

Water

Put in the borewell before the foundation. Curing needs water from the first pour.

Labour

Masons go home for Chhath and the harvest. Don't plan lenter day then.

A full village house, walls carrying the slab: village brick house cost.

What goes wrong

Four ways a 1000 sq ft budget goes wrong

800 1000 sq ft800 sq ft plot: land you ownhouse: what you build

Pricing the plot, not the house

You see: a budget 20% too high, or a thekedar quote that never matches

A 25 × 40 plot rarely carries 1000 sq ft of house on one floor. Price the built-up area from your naksha.

+1

Brick walls now, a floor on top later

You see: cracks, or a top floor that has to be dropped

Walls and strip foundation built for one floor can't take a second. If a floor is coming, build the frame now.

+++ boundary · borewell · septic

Leaving out what sits outside the house

You see: money runs out at the gate and the tank

Boundary wall, borewell, septic tank, doors and sanitary are their own lines. List them before you start.

Ask rate /sq ftAsk rate /sq ft=?

Comparing rates, not what they cover

You see: extra bills for shuttering and curing

Two quotes at the same rate per sq ft can cover different work. Compare the scope line by line.

Other ways to look at the same house

Questions people ask us

Short answers

1000 sq ft ghar banane ka kharcha kitna aata hai?

It is the material list for your structure at today's rate, plus your thekedar's labour rate times 1000 sq ft, plus what sits outside the house (boundary, borewell, septic tank, doors, sanitary). Set your choices in the list on this page and it prices the materials at today's store rate. For the per-sq-ft view, see cost per sq ft in Muzaffarpur.

1000 sq ft lenter me kitna sariya cement lagega?

For the slab alone, a 5-inch lenter over 1000 sq ft in a 1:1.5:3 mix takes about 96 bags of cement (77 at 4 inches, 115 at 6 inches) and about 1.3–1.4 t of sariya. Beams, columns and the rest of the house come on top, and your slab drawing decides the final figure.

Is 25x40 the same as 1000 sq ft?

25 × 40 = 1000, so the plot is 1000 sq ft of land. The house on it is usually smaller once open space is left at the front and back. Price the built-up area from your naksha.

Which is cheaper for 1000 sq ft: RCC frame or brick walls?

For one floor that will stay one floor, brick walls carrying the slab: about 1.5–2.2 t of sariya instead of 3.5–4.5 t, and less shuttering. The frame costs more but can take an upper floor. Switch the structure in the list to see both.

Can I build 1000 sq ft in a Bihar village with load-bearing walls?

Yes, it is common. It needs firm ground, a strip foundation of the right width, concrete bands at plinth and lintel, with the RCC slab itself acting as the roof band (Muzaffarpur is in zone IV), and a mason who knows the wall thickness the roof needs. Ask an engineer if the plot floods or the soil is soft.

Does 500 + 500 on two floors cost the same as 1000 on one?

Not quite. You save half the foundation and half the roof, but add a second slab, a staircase, heavier columns and more outside wall. Choose two floors in the list to see which lines move.

How many bricks for a 1000 sq ft house?

As a rough planning figure, 8,000–10,000 for an RCC frame and 11,000–13,000 when brick walls carry the slab. The real count comes from your wall lengths and thicknesses: bricks counted wall by wall.

How do I turn bar length into kg of sariya?

Multiply the length in metres by the standard weight per metre: 6 mm 0.222 kg, 8 mm 0.395, 10 mm 0.617, 12 mm 0.888, 16 mm 1.58. So 100 m of 12 mm bar is 88.8 kg.

Arun Tiwari
Thekedar · site work, costs and plumbing, Tashya Ventures

Arun Tiwari has run house sites around Muzaffarpur and plans material lists with customers at our Reva Road store. The quantities on this page use the same standard planning figures as our house calculator, and the finishing lines use the makers' own coverage sheets, checked on 13 Nov 2026. Where figures differ, the page uses the higher one so you don't run short.

Where the numbers come from

  1. Cement, sariya, balu, gitti and brick per sq ft: standard planning thumb rules, as set out on our house construction cost calculator and thumb rules for a house.
  2. Slab cement 77 / 96 / 115 bags for 4 / 5 / 6 inches over 1000 sq ft at 1:1.5:3: cement for chhat dhalai. Slab sariya 1.3–1.4 t: sariya in a roof slab.
  3. Birla White, wall putty work: 17–20 sq ft per kg. ActivCoat Interior primer: 110–140 sq ft/L on plaster, 170–200 on putty.
  4. Birla Opus sheets: Style Color Smart 120–140 sq ft/L, Style Perfect Start 80–100, Style Power Bright 50–60 for 2 coats; Style Super Bright distemper 70–90 sq ft/kg.
  5. Birla Pivot catalogue: 600×600 box 4 tiles, 15.5 sq ft; 300×450 box 8.72 sq ft; 300×300 box 7.75 sq ft.
  6. UltraTech, Weather Pro WP+200: 200 ml per 50 kg bag of cement.
  7. Earthquake zone IV for Muzaffarpur: IS 1893 (Part 1):2016. Bands in masonry houses: IS 4326.
  8. Bihar minimum wages from 1 April 2026 (about ₹436 unskilled, ₹551 skilled per day), as reported by compliance websites.
  9. Standard weight per metre of TMT bar: d² ÷ 162 kg.

Send us your naksha

We'll send back the material list for your 1000 sq ft, stage by stage, with today's price, on WhatsApp. Before lenter day, send photos of the sariya and shuttering and we'll look at them with you.

TASHYABUILDING SOLUTIONS · MUZAFFARPUR
WhatsApp 90310 74624tashyaventures.com